@@ -10,7 +10,7 @@ config SND_MESON_AIU
imply SND_SOC_HDMI_CODEC if DRM_MESON_DW_HDMI
help
Select Y or M to add support for the Audio output subsystem found
- in the Amlogic GX SoC family
+ in the Amlogic Meson8, Meson8b and GX SoC families
config SND_MESON_AXG_FIFO
tristate
@@ -111,34 +111,40 @@ static int aiu_encoder_i2s_setup_desc(struct snd_soc_component *component,
return 0;
}
-static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
- struct snd_pcm_hw_params *params)
+static int aiu_encoder_i2s_set_legacy_div(struct snd_soc_component *component,
+ struct snd_pcm_hw_params *params,
+ unsigned int bs)
{
- struct aiu *aiu = snd_soc_component_get_drvdata(component);
- unsigned int srate = params_rate(params);
- unsigned int fs, bs;
-
- /* Get the oversampling factor */
- fs = DIV_ROUND_CLOSEST(clk_get_rate(aiu->i2s.clks[MCLK].clk), srate);
+ switch (bs) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ /* These are the only valid legacy dividers */
+ break;
- if (fs % 64)
+ default:
+ dev_err(component->dev, "Unsupported i2s divider: %u\n", bs);
return -EINVAL;
+ };
- /* Send data MSB first */
- snd_soc_component_update_bits(component, AIU_I2S_DAC_CFG,
- AIU_I2S_DAC_CFG_MSB_FIRST,
- AIU_I2S_DAC_CFG_MSB_FIRST);
+ snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+ AIU_CLK_CTRL_I2S_DIV,
+ FIELD_PREP(AIU_CLK_CTRL_I2S_DIV,
+ __ffs(bs)));
- /* Set bclk to lrlck ratio */
- snd_soc_component_update_bits(component, AIU_CODEC_DAC_LRCLK_CTRL,
- AIU_CODEC_DAC_LRCLK_CTRL_DIV,
- FIELD_PREP(AIU_CODEC_DAC_LRCLK_CTRL_DIV,
- 64 - 1));
+ snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
+ AIU_CLK_CTRL_MORE_I2S_DIV,
+ FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV,
+ 0));
- /* Use CLK_MORE for mclk to bclk divider */
- snd_soc_component_update_bits(component, AIU_CLK_CTRL,
- AIU_CLK_CTRL_I2S_DIV, 0);
+ return 0;
+}
+static int aiu_encoder_i2s_set_more_div(struct snd_soc_component *component,
+ struct snd_pcm_hw_params *params,
+ unsigned int bs)
+{
/*
* NOTE: this HW is odd.
* In most configuration, the i2s divider is 'mclk / blck'.
@@ -146,7 +152,6 @@ static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
* increased by 50% to get the correct output rate.
* No idea why !
*/
- bs = fs / 64;
if (params_width(params) == 16 && params_channels(params) == 8) {
if (bs % 2) {
dev_err(component->dev,
@@ -156,11 +161,54 @@ static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
bs += bs / 2;
}
+ /* Use CLK_MORE for mclk to bclk divider */
+ snd_soc_component_update_bits(component, AIU_CLK_CTRL,
+ AIU_CLK_CTRL_I2S_DIV,
+ FIELD_PREP(AIU_CLK_CTRL_I2S_DIV, 0));
+
snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
AIU_CLK_CTRL_MORE_I2S_DIV,
FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV,
bs - 1));
+ return 0;
+}
+
+static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
+ struct snd_pcm_hw_params *params)
+{
+ struct aiu *aiu = snd_soc_component_get_drvdata(component);
+ unsigned int srate = params_rate(params);
+ unsigned int fs, bs;
+ int ret;
+
+ /* Get the oversampling factor */
+ fs = DIV_ROUND_CLOSEST(clk_get_rate(aiu->i2s.clks[MCLK].clk), srate);
+
+ if (fs % 64)
+ return -EINVAL;
+
+ /* Send data MSB first */
+ snd_soc_component_update_bits(component, AIU_I2S_DAC_CFG,
+ AIU_I2S_DAC_CFG_MSB_FIRST,
+ AIU_I2S_DAC_CFG_MSB_FIRST);
+
+ /* Set bclk to lrlck ratio */
+ snd_soc_component_update_bits(component, AIU_CODEC_DAC_LRCLK_CTRL,
+ AIU_CODEC_DAC_LRCLK_CTRL_DIV,
+ FIELD_PREP(AIU_CODEC_DAC_LRCLK_CTRL_DIV,
+ 64 - 1));
+
+ bs = fs / 64;
+
+ if (aiu->platform->has_clk_ctrl_more_i2s_div)
+ ret = aiu_encoder_i2s_set_more_div(component, params, bs);
+ else
+ ret = aiu_encoder_i2s_set_legacy_div(component, params, bs);
+
+ if (ret)
+ return ret;
+
/* Make sure amclk is used for HDMI i2s as well */
snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
AIU_CLK_CTRL_MORE_HDMI_AMCLK,
@@ -351,15 +351,24 @@ static int aiu_remove(struct platform_device *pdev)
static const struct aiu_platform_data aiu_gxbb_pdata = {
.has_acodec = false,
+ .has_clk_ctrl_more_i2s_div = true,
};
static const struct aiu_platform_data aiu_gxl_pdata = {
.has_acodec = true,
+ .has_clk_ctrl_more_i2s_div = true,
+};
+
+static const struct aiu_platform_data aiu_meson8_pdata = {
+ .has_acodec = false,
+ .has_clk_ctrl_more_i2s_div = false,
};
static const struct of_device_id aiu_of_match[] = {
{ .compatible = "amlogic,aiu-gxbb", .data = &aiu_gxbb_pdata },
{ .compatible = "amlogic,aiu-gxl", .data = &aiu_gxl_pdata },
+ { .compatible = "amlogic,aiu-meson8", .data = &aiu_meson8_pdata },
+ { .compatible = "amlogic,aiu-meson8b", .data = &aiu_meson8_pdata },
{}
};
MODULE_DEVICE_TABLE(of, aiu_of_match);
@@ -29,6 +29,7 @@ struct aiu_interface {
struct aiu_platform_data {
bool has_acodec;
+ bool has_clk_ctrl_more_i2s_div;
};
struct aiu {
The AIU audio controller on the Meson8 and Meson8b SoC families is compatible with the one found in the later GXBB family. Add compatible strings for these two older SoC families so the driver can be loaded for them. Instead of using the I2S divider from the AIU_CLK_CTRL_MORE register we need to use the I2S divider from the AIU_CLK_CTRL register. This older register is less flexible because it only supports four divider settings (1, 2, 4, 8) compared to the AIU_CLK_CTRL_MORE register (which supports dividers in the range 0..64). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- sound/soc/meson/Kconfig | 2 +- sound/soc/meson/aiu-encoder-i2s.c | 92 +++++++++++++++++++++++-------- sound/soc/meson/aiu.c | 9 +++ sound/soc/meson/aiu.h | 1 + 4 files changed, 81 insertions(+), 23 deletions(-)