diff mbox series

[v5,2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830.

Message ID 1581701262-110556-4-git-send-email-zhouyanjie@wanyeetech.com
State New
Headers show
Series [v5,1/6] clk: Ingenic: Remove unnecessary spinlock when reading registers. | expand

Commit Message

Zhou Yanjie Feb. 14, 2020, 5:27 p.m. UTC
The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, the
original "reg" was changed to "pll_reg", and a new "bypass_reg"
was introduced. In addition, when calculating rate, the PLL of
X1830 introduced an extra 2x multiplier, so a new "rate_multiplier"
was introduced. And adjust the code in jz47xx-cgu.c and x1000-cgu.c,
make it to be compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
    v1->v2:
    1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
      array (reg[2]).
    2.Remove the "pll_info->version" and add a "pll_info->rate_multiplier".
    3.Fix the coding style and add more detailed commit message.
    4.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
      to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
      the old mailbox is in an unstable state.
    
    v2->v3:
    Adjust order from [1/5] in v2 to [2/5] in v3.
    
    v3->v4:
    Merge [3/5] in v3 into this patch.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.

 drivers/clk/ingenic/cgu.c         | 32 +++++++++++++++++++++-----------
 drivers/clk/ingenic/cgu.h         |  8 ++++++--
 drivers/clk/ingenic/jz4725b-cgu.c |  4 +++-
 drivers/clk/ingenic/jz4740-cgu.c  |  4 +++-
 drivers/clk/ingenic/jz4770-cgu.c  |  8 ++++++--
 drivers/clk/ingenic/jz4780-cgu.c  |  4 +++-
 drivers/clk/ingenic/x1000-cgu.c   |  8 ++++++--
 7 files changed, 48 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab1302a..7d859e4 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -82,7 +82,7 @@  ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 	pll_info = &clk_info->pll;
 
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
 	m += pll_info->m_offset;
@@ -90,6 +90,9 @@  ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+	ctl = readl(cgu->base + pll_info->bypass_reg);
+
 	bypass = !pll_info->no_bypass_bit &&
 		 !!(ctl & BIT(pll_info->bypass_bit));
 
@@ -103,7 +106,8 @@  ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static unsigned long
@@ -136,7 +140,8 @@  ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -180,7 +185,7 @@  ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 			clk_info->name, req_rate, rate);
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
 	ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
@@ -191,7 +196,7 @@  ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return 0;
@@ -209,16 +214,21 @@  static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->bypass_reg);
 
 	ctl &= ~BIT(pll_info->bypass_bit);
+
+	writel(ctl, cgu->base + pll_info->bypass_reg);
+
+	ctl = readl(cgu->base + pll_info->pll_reg);
+
 	ctl |= BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 
 	/* wait for the PLL to stabilise */
 	for (i = 0; i < timeout; i++) {
-		ctl = readl(cgu->base + pll_info->reg);
+		ctl = readl(cgu->base + pll_info->pll_reg);
 		if (ctl & BIT(pll_info->stable_bit))
 			break;
 		mdelay(1);
@@ -242,11 +252,11 @@  static void ingenic_pll_disable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	ctl &= ~BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 }
 
@@ -258,7 +268,7 @@  static int ingenic_pll_is_enabled(struct clk_hw *hw)
 	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
 	u32 ctl;
 
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	return !!(ctl & BIT(pll_info->enable_bit));
 }
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004..f7b6908 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -16,7 +16,9 @@ 
 
 /**
  * struct ingenic_cgu_pll_info - information about a PLL
- * @reg: the offset of the PLL's control register within the CGU
+ * @pll_reg: the offset of the PLL's control register within the CGU
+ * @bypass_reg: the offset of the bypass control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
  * @m_shift: the number of bits to shift the multiplier value by (ie. the
  *           index of the lowest bit of the multiplier value in the PLL's
  *           control register)
@@ -43,7 +45,9 @@ 
  * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
 struct ingenic_cgu_pll_info {
-	unsigned reg;
+	unsigned pll_reg;
+	unsigned bypass_reg;
+	unsigned rate_multiplier;
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635..0b05167 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -53,7 +53,9 @@  static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.pll_reg = CGU_REG_CPPCR,
+			.bypass_reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c..78f31df 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -68,7 +68,9 @@  static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.pll_reg = CGU_REG_CPPCR,
+			.bypass_reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..32e476d 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -101,7 +101,9 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll0", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR0,
+			.pll_reg = CGU_REG_CPPCR0,
+			.bypass_reg = CGU_REG_CPPCR0,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -123,7 +125,9 @@  static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll1", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR1,
+			.pll_reg = CGU_REG_CPPCR1,
+			.bypass_reg = CGU_REG_CPPCR1,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..d07fff1 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -220,7 +220,9 @@  static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	/* PLLs */
 
 #define DEF_PLL(name) { \
-	.reg = CGU_REG_ ## name, \
+	.pll_reg = CGU_REG_ ## name, \
+	.bypass_reg = CGU_REG_ ## name, \
+	.rate_multiplier = 1, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b..d6fe28f 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -57,7 +57,9 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"apll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_APLL,
+			.pll_reg = CGU_REG_APLL,
+			.bypass_reg = CGU_REG_APLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -78,7 +80,9 @@  static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"mpll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_MPLL,
+			.pll_reg = CGU_REG_MPLL,
+			.bypass_reg = CGU_REG_MPLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,