[v3,8/9] arm64: dts: ti: k3-am654-main: Add McASP nodes

Message ID 20200123114528.26552-9-peter.ujfalusi@ti.com
State New
Headers show
Series
  • arm64: dts: ti: UDMAP and McASP support
Related show

Commit Message

Peter Ujfalusi Jan. 23, 2020, 11:45 a.m.
Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 57 ++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 7c4853a8a02c..a856079c4fa9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -663,4 +663,61 @@  pcie1_ep: pcie-ep@5600000 {
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };