diff mbox series

[v2] efi: fix a race and a buffer overflow while reading efivars via sysfs

Message ID 20200304154936.24206-1-vdronov@redhat.com
State New
Headers show
Series [v2] efi: fix a race and a buffer overflow while reading efivars via sysfs | expand

Commit Message

Vladis Dronov March 4, 2020, 3:49 p.m. UTC
There is a race and a buffer overflow corrupting a kernel memory while
reading an efi variable with a size more than 1024 bytes via the older
sysfs method. This happens because accessing struct efi_variable in
efivar_{attr,size,data}_read() and friends is not protected from
a concurrent access leading to a kernel memory corruption and, at best,
to a crash. The race scenario is the following:

CPU0:                                CPU1:
efivar_attr_read()
  var->DataSize = 1024;
  efivar_entry_get(... &var->DataSize)
    down_interruptible(&efivars_lock)
                                     efivar_attr_read() // same efi var
                                       var->DataSize = 1024;
                                       efivar_entry_get(... &var->DataSize)
                                         down_interruptible(&efivars_lock)
    virt_efi_get_variable()
    // returns EFI_BUFFER_TOO_SMALL but
    // var->DataSize is set to a real
    // var size more than 1024 bytes
    up(&efivars_lock)
                                         virt_efi_get_variable()
                                         // called with var->DataSize set
                                         // to a real var size, returns
                                         // successfully and overwrites
                                         // a 1024-bytes kernel buffer
                                         up(&efivars_lock)

This can be reproduced by concurrent reading of an efi variable which size
is more than 1024 bytes:

ts# for cpu in $(seq 0 $(nproc --ignore=1)); do ( taskset -c $cpu \
cat /sys/firmware/efi/vars/KEKDefault*/size & ) ; done

Fix this by using a local variable for a var's data buffer size so it
does not get overwritten. Also add a sanity check to efivar_store_raw().

Reported-by: Bob Sanders <bob.sanders@hpe.com> and the LTP testsuite
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
---
 drivers/firmware/efi/efi-pstore.c |  2 +-
 drivers/firmware/efi/efivars.c    | 32 ++++++++++++++++++++++---------
 drivers/firmware/efi/vars.c       |  2 +-
 3 files changed, 25 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c
index 9ea13e8d12ec..e4767a7ce973 100644
--- a/drivers/firmware/efi/efi-pstore.c
+++ b/drivers/firmware/efi/efi-pstore.c
@@ -161,7 +161,7 @@  static int efi_pstore_scan_sysfs_exit(struct efivar_entry *pos,
  *
  * @record: pstore record to pass to callback
  *
- * You MUST call efivar_enter_iter_begin() before this function, and
+ * You MUST call efivar_entry_iter_begin() before this function, and
  * efivar_entry_iter_end() afterwards.
  *
  */
diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c
index 7576450c8254..16a617f9c5cf 100644
--- a/drivers/firmware/efi/efivars.c
+++ b/drivers/firmware/efi/efivars.c
@@ -83,13 +83,16 @@  static ssize_t
 efivar_attr_read(struct efivar_entry *entry, char *buf)
 {
 	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
 	char *str = buf;
+	int ret;
 
 	if (!entry || !buf)
 		return -EINVAL;
 
-	var->DataSize = 1024;
-	if (efivar_entry_get(entry, &var->Attributes, &var->DataSize, var->Data))
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
 		return -EIO;
 
 	if (var->Attributes & EFI_VARIABLE_NON_VOLATILE)
@@ -116,13 +119,16 @@  static ssize_t
 efivar_size_read(struct efivar_entry *entry, char *buf)
 {
 	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
 	char *str = buf;
+	int ret;
 
 	if (!entry || !buf)
 		return -EINVAL;
 
-	var->DataSize = 1024;
-	if (efivar_entry_get(entry, &var->Attributes, &var->DataSize, var->Data))
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
 		return -EIO;
 
 	str += sprintf(str, "0x%lx\n", var->DataSize);
@@ -133,12 +139,15 @@  static ssize_t
 efivar_data_read(struct efivar_entry *entry, char *buf)
 {
 	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
+	int ret;
 
 	if (!entry || !buf)
 		return -EINVAL;
 
-	var->DataSize = 1024;
-	if (efivar_entry_get(entry, &var->Attributes, &var->DataSize, var->Data))
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
 		return -EIO;
 
 	memcpy(buf, var->Data, var->DataSize);
@@ -199,6 +208,9 @@  efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
 	u8 *data;
 	int err;
 
+	if (!entry || !buf)
+		return -EINVAL;
+
 	if (in_compat_syscall()) {
 		struct compat_efi_variable *compat;
 
@@ -250,14 +262,16 @@  efivar_show_raw(struct efivar_entry *entry, char *buf)
 {
 	struct efi_variable *var = &entry->var;
 	struct compat_efi_variable *compat;
+	unsigned long datasize = sizeof(var->Data);
 	size_t size;
+	int ret;
 
 	if (!entry || !buf)
 		return 0;
 
-	var->DataSize = 1024;
-	if (efivar_entry_get(entry, &entry->var.Attributes,
-			     &entry->var.DataSize, entry->var.Data))
+	ret = efivar_entry_get(entry, &var->Attributes, &datasize, var->Data);
+	var->DataSize = size;
+	if (ret)
 		return -EIO;
 
 	if (in_compat_syscall()) {
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index 436d1776bc7b..5f2a4d162795 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -1071,7 +1071,7 @@  EXPORT_SYMBOL_GPL(efivar_entry_iter_end);
  * entry on the list. It is safe for @func to remove entries in the
  * list via efivar_entry_delete().
  *
- * You MUST call efivar_enter_iter_begin() before this function, and
+ * You MUST call efivar_entry_iter_begin() before this function, and
  * efivar_entry_iter_end() afterwards.
  *
  * It is possible to begin iteration from an arbitrary entry within