deleted file mode 100644
@@ -1,94 +0,0 @@
-* Renesas R-Car GPIO Controller
-
-Required Properties:
-
- - compatible: should contain one or more of the following:
- - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller.
- - "renesas,gpio-r8a7744": for R8A7744 (RZ/G1N) compatible GPIO controller.
- - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
- - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
- - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
- - "renesas,gpio-r8a774b1": for R8A774B1 (RZ/G2N) compatible GPIO controller.
- - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller.
- - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
- - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
- - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
- - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
- - "renesas,gpio-r8a7792": for R8A7792 (R-Car V2H) compatible GPIO controller.
- - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
- - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
- - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
- - "renesas,gpio-r8a7796": for R8A77960 (R-Car M3-W) compatible GPIO controller.
- - "renesas,gpio-r8a77961": for R8A77961 (R-Car M3-W+) compatible GPIO controller.
- - "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller.
- - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller.
- - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller.
- - "renesas,gpio-r8a77990": for R8A77990 (R-Car E3) compatible GPIO controller.
- - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller.
- - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller.
- - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller.
- - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 or RZ/G2 GPIO controller.
- - "renesas,gpio-rcar": deprecated.
-
- When compatible with the generic version nodes must list the
- SoC-specific version corresponding to the platform first followed by
- the generic version.
-
- - reg: Base address and length of each memory resource used by the GPIO
- controller hardware module.
-
- - interrupts: Interrupt specifier for the controllers interrupt.
-
- - gpio-controller: Marks the device node as a gpio controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: See gpio.txt.
-
-Optional properties:
-
- - clocks: Must contain a reference to the functional clock. The property is
- mandatory if the hardware implements a controllable functional clock for
- the GPIO instance.
-
- - gpio-reserved-ranges: See gpio.txt.
-
-Please refer to gpio.txt in this directory for the common GPIO bindings used by
-client devices.
-
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-
-Example: R8A77470 (RZ/G1C) GPIO controller nodes
-
- gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a77470",
- "renesas,rcar-gen2-gpio";
- reg = <0 0xe6050000 0 0x50>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 0 23>;
- #interrupt-cells = <2>;
- interrupt-controller;
- clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
- resets = <&cpg 912>;
- };
- ...
- gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a77470",
- "renesas,rcar-gen2-gpio";
- reg = <0 0xe6053000 0 0x50>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pfc 0 96 30>;
- gpio-reserved-ranges = <17 10>;
- #interrupt-cells = <2>;
- interrupt-controller;
- clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
- resets = <&cpg 909>;
- };
new file mode 100644
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car General-Purpose Input/Output Ports (GPIO)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,gpio-r8a7778 # R-Car M1
+ - renesas,gpio-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-gpio # R-Car Gen1
+
+ - items:
+ - enum:
+ - renesas,gpio-r8a7743 # RZ/G1M
+ - renesas,gpio-r8a7744 # RZ/G1N
+ - renesas,gpio-r8a7745 # RZ/G1E
+ - renesas,gpio-r8a77470 # RZ/G1C
+ - renesas,gpio-r8a7790 # R-Car H2
+ - renesas,gpio-r8a7791 # R-Car M2-W
+ - renesas,gpio-r8a7792 # R-Car V2H
+ - renesas,gpio-r8a7793 # R-Car M2-N
+ - renesas,gpio-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+
+ - items:
+ - enum:
+ - renesas,gpio-r8a774a1 # RZ/G2M
+ - renesas,gpio-r8a774b1 # RZ/G2N
+ - renesas,gpio-r8a774c0 # RZ/G2E
+ - renesas,gpio-r8a7795 # R-Car H3
+ - renesas,gpio-r8a7796 # R-Car M3-W
+ - renesas,gpio-r8a77961 # R-Car M3-W+
+ - renesas,gpio-r8a77965 # R-Car M3-N
+ - renesas,gpio-r8a77970 # R-Car V3M
+ - renesas,gpio-r8a77980 # R-Car V3H
+ - renesas,gpio-r8a77990 # R-Car E3
+ - renesas,gpio-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 8
+
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ properties:
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupt-controller
+ - '#interrupt-cells'
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen1-gpio
+then:
+ required:
+ - clocks
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a77470-sysc.h>
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+ reg = <0xe6053000 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
Convert the Renesas General-Purpose Input/Output Ports (GPIO) Device Tree binding documentation to json-schema. Drop the deprecated "renesas,gpio-rcar" compatible value. Document missing properties. Drop the first example, as it doesn't add much value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- .../bindings/gpio/renesas,gpio-rcar.txt | 94 ------------ .../bindings/gpio/renesas,rcar-gpio.yaml | 143 ++++++++++++++++++ 2 files changed, 143 insertions(+), 94 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt create mode 100644 Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml