@@ -1028,6 +1028,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
const char *unitname = get_unitname(node);
char unit_addr[17];
uint32_t reg = 0;
+ uint32_t addr;
int len;
cell_t *cells = NULL;
@@ -1044,17 +1045,21 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
}
reg = fdt32_to_cpu(*cells);
- snprintf(unit_addr, sizeof(unit_addr), "%x", reg);
+ addr = reg & 0x3FFFFFFFU;
+ snprintf(unit_addr, sizeof(unit_addr), "%x", addr);
if (!streq(unitname, unit_addr))
FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"",
unit_addr);
for (len = prop->val.len; len > 0; len -= 4) {
reg = fdt32_to_cpu(*(cells++));
- if (reg > 0x3ff)
+ addr = reg & 0x3FFFFFFFU;
+ if ((reg & (1 << 31)) && addr > 0x3ff)
FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
- reg);
-
+ addr);
+ else if (!(reg & (1 << 31)) && addr > 0x7f)
+ FAIL_PROP(c, dti, node, prop, "I2C address must be less than 7-bits, got \"0x%x\"",
+ addr);
}
}
WARNING(i2c_bus_reg, check_i2c_bus_reg, NULL, ®_format, &i2c_bus_bridge);
Recently the I2C-controllers slave interface support was added to the kernel I2C subsystem. In this case Linux can be used as, for example, a I2C EEPROM machine. See [1] for details. Other than instantiating the EEPROM-slave device from user-space there is a way to declare the device in dts. In this case firstly the I2C bus controller must support the slave interface. Secondly I2C-slave sub-node of that controller must have "reg"-property with flag I2C_OWN_SLAVE_ADDRESS set (flag is declared in [2]). That flag is declared as (1 << 30), which when set makes dtc unhappy about too big address set for a I2C-slave: Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64: I2C bus unit address format error, expected "40000064" Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64:reg: I2C address must be less than 10-bits, got "0x40000064" Similar problem would have happened if we had set the 10-bit address flag I2C_TEN_BIT_ADDRESS in the "reg"-property. In order to fix the problem we suggest to alter the I2C-bus reg-check algorithm, so one would be aware of the upper bits set. Normally if no flag specified, the 7-bit address is expected in the "reg"-property. If I2C_TEN_BIT_ADDRESS is set, then the 10-bit address check will be performed. The I2C_OWN_SLAVE_ADDRESS flag will be just ignored. [1] Documentation/i2c/slave-interface.rst [2] include/dt-bindings/i2c/i2c.h Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-mips@vger.kernel.org Cc: linux-i2c@vger.kernel.org --- scripts/dtc/checks.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)