diff mbox series

[1/5] iio: accel: bma180: Prepare for different reset values

Message ID BN6PR04MB0660ABCDFF774833264D39A6A3A90@BN6PR04MB0660.namprd04.prod.outlook.com
State Accepted
Commit f9992af62fbf3a50d89d1f3914b2ff5cda187466
Headers show
Series [1/5] iio: accel: bma180: Prepare for different reset values | expand

Commit Message

Jonathan Bakker May 3, 2020, 5:22 p.m. UTC
Some variants of the bma180 (eg bma023) have different reset
values.  In preparation for adding support for them, factor
out the reset value into the chip specific data.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
 drivers/iio/accel/bma180.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index fcd91d5f05fd..75440dd83ec4 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -57,7 +57,7 @@  struct bma180_part_info {
 	u8 power_reg, power_mask, lowpower_val;
 	u8 int_enable_reg, int_enable_mask;
 	u8 int_map_reg, int_enable_dataready_int1_mask;
-	u8 softreset_reg;
+	u8 softreset_reg, softreset_val;
 
 	int (*chip_config)(struct bma180_data *data);
 	void (*chip_disable)(struct bma180_data *data);
@@ -319,7 +319,8 @@  static int bma180_set_pmode(struct bma180_data *data, bool mode)
 static int bma180_soft_reset(struct bma180_data *data)
 {
 	int ret = i2c_smbus_write_byte_data(data->client,
-		data->part_info->softreset_reg, BMA180_RESET_VAL);
+		data->part_info->softreset_reg,
+		data->part_info->softreset_val);
 
 	if (ret)
 		dev_err(&data->client->dev, "failed to reset the chip\n");
@@ -693,6 +694,7 @@  static const struct bma180_part_info bma180_part_info[] = {
 		.int_enable_reg = BMA180_CTRL_REG3,
 		.int_enable_mask = BMA180_NEW_DATA_INT,
 		.softreset_reg = BMA180_RESET,
+		.softreset_val = BMA180_RESET_VAL,
 		.chip_config = bma180_chip_config,
 		.chip_disable = bma180_chip_disable,
 	},
@@ -721,6 +723,7 @@  static const struct bma180_part_info bma180_part_info[] = {
 		.int_map_reg = BMA250_INT_MAP_REG,
 		.int_enable_dataready_int1_mask = BMA250_INT1_DATA_MASK,
 		.softreset_reg = BMA250_RESET_REG,
+		.softreset_val = BMA180_RESET_VAL,
 		.chip_config = bma25x_chip_config,
 		.chip_disable = bma25x_chip_disable,
 	},
@@ -749,6 +752,7 @@  static const struct bma180_part_info bma180_part_info[] = {
 		.int_map_reg = BMA254_INT_MAP_REG,
 		.int_enable_dataready_int1_mask = BMA254_INT1_DATA_MASK,
 		.softreset_reg = BMA254_RESET_REG,
+		.softreset_val = BMA180_RESET_VAL,
 		.chip_config = bma25x_chip_config,
 		.chip_disable = bma25x_chip_disable,
 	},