@@ -63,13 +63,20 @@
#define MAX_CONTACTS_LOC 5
#define TRIGGER_LOC 6
+/* Our special handling for GPIO accesses through ACPI is x86 specific */
+#if defined CONFIG_X86 && defined CONFIG_ACPI
+#define ACPI_GPIO_SUPPORT
+#endif
+
struct goodix_ts_data;
enum goodix_irq_pin_access_method {
IRQ_PIN_ACCESS_NONE,
IRQ_PIN_ACCESS_GPIO,
+#ifdef ACPI_GPIO_SUPPORT
IRQ_PIN_ACCESS_ACPI_GPIO,
IRQ_PIN_ACCESS_ACPI_METHOD,
+#endif
};
struct goodix_chip_data {
@@ -572,8 +579,8 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
static int goodix_irq_direction_output(struct goodix_ts_data *ts,
int value)
{
- struct device *dev = &ts->client->dev;
- acpi_status status;
+ struct device *dev __maybe_unused = &ts->client->dev;
+ acpi_status status __maybe_unused;
switch (ts->irq_pin_access_method) {
case IRQ_PIN_ACCESS_NONE:
@@ -583,6 +590,7 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts,
return -EINVAL;
case IRQ_PIN_ACCESS_GPIO:
return gpiod_direction_output(ts->gpiod_int, value);
+#ifdef ACPI_GPIO_SUPPORT
case IRQ_PIN_ACCESS_ACPI_GPIO:
/*
* The IRQ pin triggers on a falling edge, so its gets marked
@@ -593,6 +601,7 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts,
status = acpi_execute_simple_method(ACPI_HANDLE(dev),
"INTO", value);
return ACPI_SUCCESS(status) ? 0 : -EIO;
+#endif
}
return -EINVAL; /* Never reached */
@@ -600,8 +609,8 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts,
static int goodix_irq_direction_input(struct goodix_ts_data *ts)
{
- struct device *dev = &ts->client->dev;
- acpi_status status;
+ struct device *dev __maybe_unused = &ts->client->dev;
+ acpi_status status __maybe_unused;
switch (ts->irq_pin_access_method) {
case IRQ_PIN_ACCESS_NONE:
@@ -610,12 +619,15 @@ static int goodix_irq_direction_input(struct goodix_ts_data *ts)
__func__);
return -EINVAL;
case IRQ_PIN_ACCESS_GPIO:
+ return gpiod_direction_input(ts->gpiod_int);
+#ifdef ACPI_GPIO_SUPPORT
case IRQ_PIN_ACCESS_ACPI_GPIO:
return gpiod_direction_input(ts->gpiod_int);
case IRQ_PIN_ACCESS_ACPI_METHOD:
status = acpi_evaluate_object(ACPI_HANDLE(dev), "INTI",
NULL, NULL);
return ACPI_SUCCESS(status) ? 0 : -EIO;
+#endif
}
return -EINVAL; /* Never reached */
@@ -679,7 +691,7 @@ static int goodix_reset(struct goodix_ts_data *ts)
return 0;
}
-#if defined CONFIG_X86 && defined CONFIG_ACPI
+#ifdef ACPI_GPIO_SUPPORT
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
@@ -862,6 +874,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
ts->gpiod_rst = gpiod;
switch (ts->irq_pin_access_method) {
+#ifdef ACPI_GPIO_SUPPORT
case IRQ_PIN_ACCESS_ACPI_GPIO:
/*
* We end up here if goodix_add_acpi_gpio_mappings() has
@@ -878,6 +891,7 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
if (!ts->gpiod_rst)
ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
break;
+#endif
default:
if (ts->gpiod_int && ts->gpiod_rst) {
ts->reset_controller_at_probe = true;
acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be disabled through an #ifdef when ACPI support is not enabled. For consistency also #ifdef out the IRQ_PIN_ACCESS_ACPI_GPIO code and use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485320e ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Introduce ACPI_GPIO_SUPPORT helper define - Use __maybe_unused for variables which will be unused when ACPI_GPIO_SUPPORT is not set --- drivers/input/touchscreen/goodix.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-)