@@ -22,7 +22,9 @@
#define EXC3000_NUM_SLOTS 10
#define EXC3000_SLOTS_PER_FRAME 5
#define EXC3000_LEN_FRAME 66
+#define EXC3000_LEN_VENDOR_REQUEST 68
#define EXC3000_LEN_POINT 10
+#define EXC3000_VENDOR_EVENT 3
#define EXC3000_MT_EVENT 6
#define EXC3000_TIMEOUT_MS 100
@@ -32,6 +34,9 @@ struct exc3000_data {
struct touchscreen_properties prop;
struct timer_list timer;
u8 buf[2 * EXC3000_LEN_FRAME];
+ struct mutex vendor_data_lock;
+ struct completion vendor_data_done;
+ char *type, *model, *fw_rev;
};
static void exc3000_report_slots(struct input_dev *input,
@@ -136,6 +141,13 @@ static int exc3000_handle_mt_event(struct exc3000_data *data)
return ret;
}
+static int exc3000_handle_vendor_event(struct exc3000_data *data)
+{
+ complete(&data->vendor_data_done);
+
+ return 0;
+}
+
static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
{
struct exc3000_data *data = dev_id;
@@ -153,6 +165,9 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
case EXC3000_MT_EVENT:
exc3000_handle_mt_event(data);
break;
+ case EXC3000_VENDOR_EVENT:
+ exc3000_handle_vendor_event(data);
+ break;
default:
break;
}
@@ -161,6 +176,100 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int exc3000_vendor_data_request(struct exc3000_data *data, u8 *request,
+ u8 request_len, u8 *response)
+{
+ u8 buf[EXC3000_LEN_VENDOR_REQUEST] = { 0x67, 0x00, 0x42, 0x00, 0x03 };
+ int ret;
+
+ mutex_lock(&data->vendor_data_lock);
+
+ reinit_completion(&data->vendor_data_done);
+
+ buf[5] = request_len;
+ memcpy(&buf[6], request, request_len);
+
+ ret = i2c_master_send(data->client, buf, EXC3000_LEN_VENDOR_REQUEST);
+ if (ret < 0)
+ goto out_unlock;
+
+ if (response) {
+ ret = wait_for_completion_timeout(&data->vendor_data_done,
+ 10 * HZ);
+ if (!ret) {
+ ret = -ETIMEDOUT;
+ goto out_unlock;
+ }
+ memcpy(response, &data->buf[4], data->buf[3]);
+ ret = data->buf[3];
+ }
+
+out_unlock:
+ mutex_unlock(&data->vendor_data_lock);
+
+ return ret;
+}
+static int exc3000_populate_device_info(struct exc3000_data *data)
+{
+ struct device *dev = &data->client->dev;
+ u8 response[EXC3000_LEN_FRAME];
+ int ret;
+
+ /* query type info */
+ ret = exc3000_vendor_data_request(data, (u8[]){0x46}, 1, response);
+ if (ret < 0)
+ return -ENODEV;
+
+ data->type = devm_kmemdup(dev, &response[1], ret - 1, GFP_KERNEL);
+ if (!data->type)
+ return -ENOMEM;
+
+ /* query model info */
+ ret = exc3000_vendor_data_request(data, (u8[]){0x45}, 1, response);
+ if (ret < 0)
+ return -ENODEV;
+
+ data->model = devm_kmemdup(dev, &response[1], ret - 1, GFP_KERNEL);
+ if (!data->model)
+ return -ENOMEM;
+
+ /* query bootloader info */
+ ret = exc3000_vendor_data_request(data,
+ (u8[]){0x39, 0x02}, 2, response);
+ if (ret < 0)
+ return -ENODEV;
+
+ /*
+ * If the bootloader version is non-zero then the device is in
+ * bootloader mode and won't answer a query for the application FW
+ * version, so we just use the bootloader version info.
+ */
+ if (response[2] || response[3]) {
+ char bl_version[8];
+
+ snprintf(bl_version, 8, "%d.%d", response[2], response[3]);
+ data->fw_rev = devm_kmemdup(dev, bl_version,
+ strlen(bl_version), GFP_KERNEL);
+ } else {
+ /* query application firmware version */
+ ret = exc3000_vendor_data_request(data,
+ (u8[]){0x44}, 1, response);
+ if (ret < 0)
+ return -ENODEV;
+
+ data->fw_rev = devm_kmemdup(dev, &response[1],
+ ret - 1, GFP_KERNEL);
+ }
+ if (!data->fw_rev)
+ return -ENOMEM;
+
+ dev_info(&data->client->dev,
+ "found type %s, model %s, firmware revision %s",
+ data->type, data->model, data->fw_rev);
+
+ return 0;
+}
+
static int exc3000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -174,6 +283,8 @@ static int exc3000_probe(struct i2c_client *client,
data->client = client;
timer_setup(&data->timer, exc3000_timer, 0);
+ mutex_init(&data->vendor_data_lock);
+ init_completion(&data->vendor_data_done);
input = devm_input_allocate_device(&client->dev);
if (!input)
@@ -203,6 +314,10 @@ static int exc3000_probe(struct i2c_client *client,
if (error)
return error;
+ error = exc3000_populate_device_info(data);
+ if (error)
+ return error;
+
return 0;
}
It's useful to have this information in the log, as differences in behavior can be tied to the controller firmare. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- v2: - don't request IRQ before input device is set up - add timeout to wait for vendor request response - add error handling to memory allocations --- drivers/input/touchscreen/exc3000.c | 115 ++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+)