@@ -412,6 +412,10 @@ struct f11_2d_sensor_queries {
/* Defs for Ctrl0. */
#define RMI_F11_REPORT_MODE_MASK 0x07
+#define RMI_F11_REPORT_MODE_CONTINUOUS (0 << 0)
+#define RMI_F11_REPORT_MODE_REDUCED (1 << 0)
+#define RMI_F11_REPORT_MODE_FS_CHANGE (2 << 0)
+#define RMI_F11_REPORT_MODE_FP_CHANGE (3 << 0)
#define RMI_F11_ABS_POS_FILT (1 << 3)
#define RMI_F11_REL_POS_FILT (1 << 4)
#define RMI_F11_REL_BALLISTICS (1 << 5)
@@ -1195,6 +1199,16 @@ static int rmi_f11_initialize(struct rmi_function *fn)
ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
sensor->axis_align.delta_y_threshold;
+ /*
+ * If distance threshold values are set, switch to reduced reporting
+ * mode so they actually get used by the controller.
+ */
+ if (ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] ||
+ ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD]) {
+ ctrl->ctrl0_11[0] &= ~RMI_F11_REPORT_MODE_MASK;
+ ctrl->ctrl0_11[0] |= RMI_F11_REPORT_MODE_REDUCED;
+ }
+
if (f11->sens_query.has_dribble) {
switch (sensor->dribble) {
case RMI_REG_STATE_OFF:
When the distance thresholds are set the controller must be in reduced reporting mode for them to have any effect on the interrupt generation. This has a potentially large impact on the number of events the host needs to process. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- I'm not sure if we want a separate DT property to allow the use of reduced reporting mode, as this change might lead to problems for controllers with unreasonably large threshold values. I'm not sure if any controller with bogus threshold values exist in the wild. --- drivers/input/rmi4/rmi_f11.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)