diff mbox

[Linaro-mm-sig,2/2] Revert "drivers: of: add initialization code for dma reserved memory"

Message ID 1381476448-14548-3-git-send-email-m.szyprowski@samsung.com
State Accepted
Commit 1931ee143b0ab72924944bc06e363d837ba05063
Headers show

Commit Message

Marek Szyprowski Oct. 11, 2013, 7:27 a.m. UTC
This reverts commit 9d8eab7af79cb4ce2de5de39f82c455b1f796963. There is
still no consensus on the bindings for the reserved memory and various
drawbacks of the proposed solution has been shown, so the best now is to
revert it completely and start again from scratch later.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 Documentation/devicetree/bindings/memory.txt |  168 -------------------------
 drivers/of/Kconfig                           |    6 -
 drivers/of/Makefile                          |    1 -
 drivers/of/of_reserved_mem.c                 |  173 --------------------------
 drivers/of/platform.c                        |    4 -
 include/linux/of_reserved_mem.h              |   14 ---
 6 files changed, 366 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/memory.txt
 delete mode 100644 drivers/of/of_reserved_mem.c
 delete mode 100644 include/linux/of_reserved_mem.h
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt
deleted file mode 100644
index eb24693..0000000
--- a/Documentation/devicetree/bindings/memory.txt
+++ /dev/null
@@ -1,168 +0,0 @@ 
-*** Memory binding ***
-
-The /memory node provides basic information about the address and size
-of the physical memory. This node is usually filled or updated by the
-bootloader, depending on the actual memory configuration of the given
-hardware.
-
-The memory layout is described by the following node:
-
-/ {
-	#address-cells = <(n)>;
-	#size-cells = <(m)>;
-	memory {
-		device_type = "memory";
-		reg =  <(baseaddr1) (size1)
-			(baseaddr2) (size2)
-			...
-			(baseaddrN) (sizeN)>;
-	};
-	...
-};
-
-A memory node follows the typical device tree rules for "reg" property:
-n:		number of cells used to store base address value
-m:		number of cells used to store size value
-baseaddrX:	defines a base address of the defined memory bank
-sizeX:		the size of the defined memory bank
-
-
-More than one memory bank can be defined.
-
-
-*** Reserved memory regions ***
-
-In /memory/reserved-memory node one can create child nodes describing
-particular reserved (excluded from normal use) memory regions. Such
-memory regions are usually designed for the special usage by various
-device drivers. A good example are contiguous memory allocations or
-memory sharing with other operating system on the same hardware board.
-Those special memory regions might depend on the board configuration and
-devices used on the target system.
-
-Parameters for each memory region can be encoded into the device tree
-with the following convention:
-
-[(label):] (name) {
-	compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-	reg = <(address) (size)>;
-	(linux,default-contiguous-region);
-};
-
-compatible:	one or more of:
-	- "linux,contiguous-memory-region" - enables binding of this
-	  region to Contiguous Memory Allocator (special region for
-	  contiguous memory allocations, shared with movable system
-	  memory, Linux kernel-specific).
-	- "reserved-memory-region" - compatibility is defined, given
-	  region is assigned for exclusive usage for by the respective
-	  devices.
-
-reg:	standard property defining the base address and size of
-	the memory region
-
-linux,default-contiguous-region: property indicating that the region
-	is the default region for all contiguous memory
-	allocations, Linux specific (optional)
-
-It is optional to specify the base address, so if one wants to use
-autoconfiguration of the base address, '0' can be specified as a base
-address in the 'reg' property.
-
-The /memory/reserved-memory node must contain the same #address-cells
-and #size-cells value as the root node.
-
-
-*** Device node's properties ***
-
-Once regions in the /memory/reserved-memory node have been defined, they
-may be referenced by other device nodes. Bindings that wish to reference
-memory regions should explicitly document their use of the following
-property:
-
-memory-region = <&phandle_to_defined_region>;
-
-This property indicates that the device driver should use the memory
-region pointed by the given phandle.
-
-
-*** Example ***
-
-This example defines a memory consisting of 4 memory banks. 3 contiguous
-regions are defined for Linux kernel, one default of all device drivers
-(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
-framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
-and one for multimedia processing (labelled multimedia_mem, placed at
-0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
-device for DMA memory allocations (Linux kernel drivers will use CMA is
-available or dma-exclusive usage otherwise). 'multimedia_mem' is
-assigned to scaler@12500000 and codec@12600000 devices for contiguous
-memory allocations when CMA driver is enabled.
-
-The reason for creating a separate region for framebuffer device is to
-match the framebuffer base address to the one configured by bootloader,
-so once Linux kernel drivers starts no glitches on the displayed boot
-logo appears. Scaller and codec drivers should share the memory
-allocations.
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* ... */
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-
-		reserved-memory {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * global autoconfigured region for contiguous allocations
-			 * (used only with Contiguous Memory Allocator)
-			 */
-			contig_region@0 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x0 0x4000000>;
-				linux,default-contiguous-region;
-			};
-
-			/*
-			 * special region for framebuffer
-			 */
-			display_region: region@78000000 {
-				compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-				reg = <0x78000000 0x800000>;
-			};
-
-			/*
-			 * special region for multimedia processing devices
-			 */
-			multimedia_region: region@77000000 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x77000000 0x4000000>;
-			};
-		};
-	};
-
-	/* ... */
-
-	fb0: fb@12300000 {
-		status = "okay";
-		memory-region = <&display_region>;
-	};
-
-	scaler: scaler@12500000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-
-	codec: codec@12600000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-};
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 9d2009a..78cc760 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -74,10 +74,4 @@  config OF_MTD
 	depends on MTD
 	def_bool y
 
-config OF_RESERVED_MEM
-	depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK))
-	def_bool y
-	help
-	  Initialization code for DMA reserved memory
-
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index ed9660a..efd0510 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,4 +9,3 @@  obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_PCI)	+= of_pci.o
 obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
 obj-$(CONFIG_OF_MTD)	+= of_mtd.o
-obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
deleted file mode 100644
index 0fe40c7..0000000
--- a/drivers/of/of_reserved_mem.c
+++ /dev/null
@@ -1,173 +0,0 @@ 
-/*
- * Device tree based initialization code for reserved memory.
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License or (at your optional) any later version of the license.
- */
-
-#include <linux/memblock.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/mm.h>
-#include <linux/sizes.h>
-#include <linux/mm_types.h>
-#include <linux/dma-contiguous.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_reserved_mem.h>
-
-#define MAX_RESERVED_REGIONS	16
-struct reserved_mem {
-	phys_addr_t		base;
-	unsigned long		size;
-	struct cma		*cma;
-	char			name[32];
-};
-static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
-static int reserved_mem_count;
-
-static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname,
-					int depth, void *data)
-{
-	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
-	phys_addr_t base, size;
-	int is_cma, is_reserved;
-	unsigned long len;
-	const char *status;
-	__be32 *prop;
-
-	is_cma = IS_ENABLED(CONFIG_DMA_CMA) &&
-	       of_flat_dt_is_compatible(node, "linux,contiguous-memory-region");
-	is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region");
-
-	if (!is_reserved && !is_cma) {
-		/* ignore node and scan next one */
-		return 0;
-	}
-
-	status = of_get_flat_dt_prop(node, "status", &len);
-	if (status && strcmp(status, "okay") != 0) {
-		/* ignore disabled node nad scan next one */
-		return 0;
-	}
-
-	prop = of_get_flat_dt_prop(node, "reg", &len);
-	if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) *
-			     sizeof(__be32))) {
-		pr_err("Reserved mem: node %s, incorrect \"reg\" property\n",
-		       uname);
-		/* ignore node and scan next one */
-		return 0;
-	}
-	base = dt_mem_next_cell(dt_root_addr_cells, &prop);
-	size = dt_mem_next_cell(dt_root_size_cells, &prop);
-
-	if (!size) {
-		/* ignore node and scan next one */
-		return 0;
-	}
-
-	pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n",
-		uname, (unsigned long)base, (unsigned long)size / SZ_1M);
-
-	if (reserved_mem_count == ARRAY_SIZE(reserved_mem))
-		return -ENOSPC;
-
-	rmem->base = base;
-	rmem->size = size;
-	strlcpy(rmem->name, uname, sizeof(rmem->name));
-
-	if (is_cma) {
-		struct cma *cma;
-		if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) {
-			rmem->cma = cma;
-			reserved_mem_count++;
-			if (of_get_flat_dt_prop(node,
-						"linux,default-contiguous-region",
-						NULL))
-				dma_contiguous_set_default(cma);
-		}
-	} else if (is_reserved) {
-		if (memblock_remove(base, size) == 0)
-			reserved_mem_count++;
-		else
-			pr_err("Failed to reserve memory for %s\n", uname);
-	}
-
-	return 0;
-}
-
-static struct reserved_mem *get_dma_memory_region(struct device *dev)
-{
-	struct device_node *node;
-	const char *name;
-	int i;
-
-	node = of_parse_phandle(dev->of_node, "memory-region", 0);
-	if (!node)
-		return NULL;
-
-	name = kbasename(node->full_name);
-	for (i = 0; i < reserved_mem_count; i++)
-		if (strcmp(name, reserved_mem[i].name) == 0)
-			return &reserved_mem[i];
-	return NULL;
-}
-
-/**
- * of_reserved_mem_device_init() - assign reserved memory region to given device
- *
- * This function assign memory region pointed by "memory-region" device tree
- * property to the given device.
- */
-void of_reserved_mem_device_init(struct device *dev)
-{
-	struct reserved_mem *region = get_dma_memory_region(dev);
-	if (!region)
-		return;
-
-	if (region->cma) {
-		dev_set_cma_area(dev, region->cma);
-		pr_info("Assigned CMA %s to %s device\n", region->name,
-			dev_name(dev));
-	} else {
-		if (dma_declare_coherent_memory(dev, region->base, region->base,
-		    region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0)
-			pr_info("Declared reserved memory %s to %s device\n",
-				region->name, dev_name(dev));
-	}
-}
-
-/**
- * of_reserved_mem_device_release() - release reserved memory device structures
- *
- * This function releases structures allocated for memory region handling for
- * the given device.
- */
-void of_reserved_mem_device_release(struct device *dev)
-{
-	struct reserved_mem *region = get_dma_memory_region(dev);
-	if (!region && !region->cma)
-		dma_release_declared_memory(dev);
-}
-
-/**
- * early_init_dt_scan_reserved_mem() - create reserved memory regions
- *
- * This function grabs memory from early allocator for device exclusive use
- * defined in device tree structures. It should be called by arch specific code
- * once the early allocator (memblock) has been activated and all other
- * subsystems have already allocated/reserved memory.
- */
-void __init early_init_dt_scan_reserved_mem(void)
-{
-	of_scan_flat_dt_by_path("/memory/reserved-memory",
-				fdt_scan_reserved_mem, NULL);
-}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 9b439ac..f6dcde2 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -21,7 +21,6 @@ 
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 
 const struct of_device_id of_default_bus_match_table[] = {
@@ -219,8 +218,6 @@  static struct platform_device *of_platform_device_create_pdata(
 	dev->dev.bus = &platform_bus_type;
 	dev->dev.platform_data = platform_data;
 
-	of_reserved_mem_device_init(&dev->dev);
-
 	/* We do not fill the DMA ops for platform devices by default.
 	 * This is currently the responsibility of the platform code
 	 * to do such, possibly using a device notifier
@@ -228,7 +225,6 @@  static struct platform_device *of_platform_device_create_pdata(
 
 	if (of_device_add(dev) != 0) {
 		platform_device_put(dev);
-		of_reserved_mem_device_release(&dev->dev);
 		return NULL;
 	}
 
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
deleted file mode 100644
index c841282..0000000
--- a/include/linux/of_reserved_mem.h
+++ /dev/null
@@ -1,14 +0,0 @@ 
-#ifndef __OF_RESERVED_MEM_H
-#define __OF_RESERVED_MEM_H
-
-#ifdef CONFIG_OF_RESERVED_MEM
-void of_reserved_mem_device_init(struct device *dev);
-void of_reserved_mem_device_release(struct device *dev);
-void early_init_dt_scan_reserved_mem(void);
-#else
-static inline void of_reserved_mem_device_init(struct device *dev) { }
-static inline void of_reserved_mem_device_release(struct device *dev) { }
-static inline void early_init_dt_scan_reserved_mem(void) { }
-#endif
-
-#endif /* __OF_RESERVED_MEM_H */