diff mbox series

rcar-csi2: Rename confirm_start() to phy_post_init() to match its usage

Message ID 20200611193232.128721-1-niklas.soderlund+renesas@ragnatech.se
State Accepted
Commit ec050e022f8da39c2c9d6f4eb8c7f343fe2664ad
Headers show
Series rcar-csi2: Rename confirm_start() to phy_post_init() to match its usage | expand

Commit Message

Niklas Söderlund June 11, 2020, 7:32 p.m. UTC 
Since the driver was picked-up the starting of the PHY have changed
quiet a bit. An artifact of these changes is the now poorly named
callback confirm_start(). It used to confirm start of the PHY but now
performs post PHY start initialization, rename it to phy_post_init() to
reflect this.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 151e6a90c5fbc70e..6dbfac9dcf775f84 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -344,7 +344,7 @@  enum rcar_csi2_pads {
 
 struct rcar_csi2_info {
 	int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
-	int (*confirm_start)(struct rcar_csi2 *priv);
+	int (*phy_post_init)(struct rcar_csi2 *priv);
 	const struct rcsi2_mbps_reg *hsfreqrange;
 	unsigned int csi0clkfreqrange;
 	unsigned int num_channels;
@@ -575,9 +575,9 @@  static int rcsi2_start_receiver(struct rcar_csi2 *priv)
 	if (ret)
 		return ret;
 
-	/* Confirm start */
-	if (priv->info->confirm_start) {
-		ret = priv->info->confirm_start(priv);
+	/* Run post PHY start initialization, if needed. */
+	if (priv->info->phy_post_init) {
+		ret = priv->info->phy_post_init(priv);
 		if (ret)
 			return ret;
 	}
@@ -975,7 +975,7 @@  static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps)
 	return rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3m_e3, 0x44);
 }
 
-static int rcsi2_confirm_start_v3m_e3(struct rcar_csi2 *priv)
+static int rcsi2_phy_post_init_v3m_e3(struct rcar_csi2 *priv)
 {
 	static const struct phtw_value step1[] = {
 		{ .data = 0xee, .code = 0x34 },
@@ -1059,7 +1059,7 @@  static const struct rcar_csi2_info rcar_csi2_info_r8a77965 = {
 
 static const struct rcar_csi2_info rcar_csi2_info_r8a77970 = {
 	.init_phtw = rcsi2_init_phtw_v3m_e3,
-	.confirm_start = rcsi2_confirm_start_v3m_e3,
+	.phy_post_init = rcsi2_phy_post_init_v3m_e3,
 	.num_channels = 4,
 };
 
@@ -1072,7 +1072,7 @@  static const struct rcar_csi2_info rcar_csi2_info_r8a77980 = {
 
 static const struct rcar_csi2_info rcar_csi2_info_r8a77990 = {
 	.init_phtw = rcsi2_init_phtw_v3m_e3,
-	.confirm_start = rcsi2_confirm_start_v3m_e3,
+	.phy_post_init = rcsi2_phy_post_init_v3m_e3,
 	.num_channels = 2,
 };