@@ -128,6 +128,7 @@ struct ipu_csi {
#define MIPI_DT_RAW10 0x2b
#define MIPI_DT_RAW12 0x2c
#define MIPI_DT_RAW14 0x2d
+#define MIPI_DT_RAW16 0x2e
/*
* Bitfield of CSI bus signal polarities and modes.
@@ -157,6 +158,7 @@ enum ipu_csi_data_width {
IPU_CSI_DATA_WIDTH_8 = 1,
IPU_CSI_DATA_WIDTH_10 = 3,
IPU_CSI_DATA_WIDTH_12 = 5,
+ IPU_CSI_DATA_WIDTH_14 = 7,
IPU_CSI_DATA_WIDTH_16 = 9,
};
@@ -303,6 +305,24 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code,
cfg->mipi_dt = MIPI_DT_RAW12;
cfg->data_width = IPU_CSI_DATA_WIDTH_12;
break;
+ case MEDIA_BUS_FMT_SBGGR14_1X14:
+ case MEDIA_BUS_FMT_SGBRG14_1X14:
+ case MEDIA_BUS_FMT_SGRBG14_1X14:
+ case MEDIA_BUS_FMT_SRGGB14_1X14:
+ case MEDIA_BUS_FMT_Y14_1X14:
+ cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+ cfg->mipi_dt = MIPI_DT_RAW14;
+ cfg->data_width = IPU_CSI_DATA_WIDTH_14;
+ break;
+ case MEDIA_BUS_FMT_SBGGR16_1X16:
+ case MEDIA_BUS_FMT_SGBRG16_1X16:
+ case MEDIA_BUS_FMT_SGRBG16_1X16:
+ case MEDIA_BUS_FMT_SRGGB16_1X16:
+ case MEDIA_BUS_FMT_Y16_1X16:
+ cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER;
+ cfg->mipi_dt = MIPI_DT_RAW16;
+ cfg->data_width = IPU_CSI_DATA_WIDTH_16;
+ break;
case MEDIA_BUS_FMT_JPEG_1X8:
/* TODO */
cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_JPEG;
@@ -64,7 +64,7 @@
#define MEDIA_BUS_FMT_RGB121212_1X36 0x1019
#define MEDIA_BUS_FMT_RGB161616_1X48 0x101a
-/* YUV (including grey) - next is 0x202e */
+/* YUV (including grey) - next is 0x202f */
#define MEDIA_BUS_FMT_Y8_1X8 0x2001
#define MEDIA_BUS_FMT_UV8_1X8 0x2015
#define MEDIA_BUS_FMT_UYVY8_1_5X8 0x2002
@@ -87,6 +87,7 @@
#define MEDIA_BUS_FMT_YUYV12_2X12 0x201e
#define MEDIA_BUS_FMT_YVYU12_2X12 0x201f
#define MEDIA_BUS_FMT_Y14_1X14 0x202d
+#define MEDIA_BUS_FMT_Y16_1X16 0x202e
#define MEDIA_BUS_FMT_UYVY8_1X16 0x200f
#define MEDIA_BUS_FMT_VYUY8_1X16 0x2010
#define MEDIA_BUS_FMT_YUYV8_1X16 0x2011
It appears the i.MX camera interface is missing support for 14- and 16-bit Bayer and B&W-only formats. Add it. Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>