diff mbox series

[2/2] media: i2c: ov5645: Switch to assigned-clock-rates

Message ID 1583754373-16510-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series media: i2c: ov5645: Switch to assigned-clock-rates | expand

Commit Message

Prabhakar Mahadev Lad March 9, 2020, 11:46 a.m. UTC 
This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate, as a result
setting the clk rate from the driver is dropped.

Correspondingly imx6qdl-wandboard.dtsi which references to ov5645 has been
updated to use assigned-clock-rates in the same patch to avoid bisect
failures.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 3 ++-
 drivers/media/i2c/ov5645.c               | 9 ++-------
 2 files changed, 4 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893..71f5f75 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -126,7 +126,8 @@ 
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
 		clock-names = "xclk";
-		clock-frequency = <24000000>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
+		assigned-clock-rates = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
 		vddd-supply = <&reg_1p5v>;
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d1..2aa2677 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1094,7 +1094,8 @@  static int ov5645_probe(struct i2c_client *client)
 		return PTR_ERR(ov5645->xclk);
 	}
 
-	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
+	ret = of_property_read_u32(dev->of_node, "assigned-clock-rates",
+				   &xclk_freq);
 	if (ret) {
 		dev_err(dev, "could not get xclk frequency\n");
 		return ret;
@@ -1107,12 +1108,6 @@  static int ov5645_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	ret = clk_set_rate(ov5645->xclk, xclk_freq);
-	if (ret) {
-		dev_err(dev, "could not set xclk frequency\n");
-		return ret;
-	}
-
 	for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
 		ov5645->supplies[i].supply = ov5645_supply_name[i];