@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <media/v4l2-async.h>
#include <media/v4l2-device.h>
@@ -1356,16 +1357,51 @@ static const struct media_entity_operations tvp5150_sd_media_ops = {
/****************************************************************************
I2C Command
****************************************************************************/
+static int __maybe_unused tvp5150_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tvp5150 *decoder = to_tvp5150(sd);
+
+ if (decoder->irq)
+ /* Disable lock interrupt */
+ return regmap_update_bits(decoder->regmap,
+ TVP5150_INT_ENABLE_REG_A,
+ TVP5150_INT_A_LOCK, 0);
+ return 0;
+}
+
+static int __maybe_unused tvp5150_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tvp5150 *decoder = to_tvp5150(sd);
+
+ if (decoder->irq)
+ /* Enable lock interrupt */
+ return regmap_update_bits(decoder->regmap,
+ TVP5150_INT_ENABLE_REG_A,
+ TVP5150_INT_A_LOCK,
+ TVP5150_INT_A_LOCK);
+ return 0;
+}
static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
{
struct tvp5150 *decoder = to_tvp5150(sd);
- unsigned int mask, val = 0, int_val = 0;
+ unsigned int mask, val = 0;
+ int ret;
mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
TVP5150_MISC_CTL_CLOCK_OE;
if (enable) {
+ ret = pm_runtime_get_sync(sd->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(sd->dev);
+ return ret;
+ }
+
tvp5150_enable(sd);
/* Enable outputs if decoder is locked */
@@ -1373,15 +1409,13 @@ static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
val = decoder->lock ? decoder->oe : 0;
else
val = decoder->oe;
- int_val = TVP5150_INT_A_LOCK;
+
v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);
+ } else {
+ pm_runtime_put(sd->dev);
}
regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);
- if (decoder->irq)
- /* Enable / Disable lock interrupt */
- regmap_update_bits(decoder->regmap, TVP5150_INT_ENABLE_REG_A,
- TVP5150_INT_A_LOCK, int_val);
return 0;
}
@@ -2077,6 +2111,11 @@ static int tvp5150_probe(struct i2c_client *c)
if (debug > 1)
tvp5150_log_status(sd);
+
+ pm_runtime_set_active(&c->dev);
+ pm_runtime_enable(&c->dev);
+ pm_runtime_idle(&c->dev);
+
return 0;
err:
@@ -2100,11 +2139,20 @@ static int tvp5150_remove(struct i2c_client *c)
media_device_unregister_entity(&decoder->connectors[i].ent);
v4l2_async_unregister_subdev(sd);
v4l2_ctrl_handler_free(&decoder->hdl);
+ pm_runtime_disable(&c->dev);
+ pm_runtime_set_suspended(&c->dev);
+
return 0;
}
/* ----------------------------------------------------------------------- */
+static const struct dev_pm_ops tvp5150_pm_ops = {
+ SET_RUNTIME_PM_OPS(tvp5150_runtime_suspend,
+ tvp5150_runtime_resume,
+ NULL)
+};
+
static const struct i2c_device_id tvp5150_id[] = {
{ "tvp5150", 0 },
{ }
@@ -2123,6 +2171,7 @@ static struct i2c_driver tvp5150_driver = {
.driver = {
.of_match_table = of_match_ptr(tvp5150_of_match),
.name = "tvp5150",
+ .pm = &tvp5150_pm_ops,
},
.probe_new = tvp5150_probe,
.remove = tvp5150_remove,
As documented in [1] the runtime-pm ops are used to set the device into a fully 'workable' state. Therefore it can be used to enable or disable the irqs. [1] https://www.kernel.org/doc/html/latest/power/runtime_pm.html Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- v12: - change commit header and message -> former "media: tvp5150: add s_power callback" - drop s_power() callback and use pm_runtime callbacks instead drivers/media/i2c/tvp5150.c | 61 +++++++++++++++++++++++++++++++++---- 1 file changed, 55 insertions(+), 6 deletions(-)