@@ -301,7 +301,7 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
}
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal);
+ EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
if (err) {
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
@@ -1404,9 +1404,9 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
if (notify_type == EXT_CSD_POWER_OFF_LONG)
timeout = card->ext_csd.power_off_longtime;
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout);
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ notify_type, timeout, true, false);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
@@ -404,11 +404,12 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
* @timeout_ms: timeout (ms) for operation performed by register write,
* timeout of zero implies maximum possible timeout
* @use_busy_signal: use the busy signal as response type
+ * @send_status: send status cmd to poll for busy
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
- unsigned int timeout_ms, bool use_busy_signal)
+ unsigned int timeout_ms, bool use_busy_signal, bool send_status)
{
int err;
struct mmc_command cmd = {0};
@@ -454,14 +455,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
do {
- err = __mmc_send_status(card, &status, ignore_crc);
- if (err)
- return err;
+ if (send_status) {
+ err = __mmc_send_status(card, &status, ignore_crc);
+ if (err)
+ return err;
+ }
if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
break;
if (mmc_host_is_spi(card->host))
break;
+ /*
+ * We are not allowed to issue a status command and the host
+ * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
+ * rely on waiting for the stated timeout to be sufficient.
+ */
+ if (!send_status) {
+ mmc_delay(timeout_ms);
+ return 0;
+ }
+
/* Timeout if the device never leaves the program state. */
if (time_after(jiffies, timeout)) {
pr_err("%s: Card stuck in programming state! %s\n",
@@ -488,7 +501,7 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
- return __mmc_switch(card, set, index, value, timeout_ms, true);
+ return __mmc_switch(card, set, index, value, timeout_ms, true, true);
}
EXPORT_SYMBOL_GPL(mmc_switch);
@@ -151,7 +151,8 @@ extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
-extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool);
+extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
+ bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> --- Changes in v2: Rebase towards latest mmc-next. --- drivers/mmc/core/core.c | 2 +- drivers/mmc/core/mmc.c | 6 +++--- drivers/mmc/core/mmc_ops.c | 23 ++++++++++++++++++----- include/linux/mmc/core.h | 3 ++- 4 files changed, 24 insertions(+), 10 deletions(-)