@@ -264,6 +264,7 @@ struct lpuart_port {
int rx_dma_rng_buf_len;
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
+ bool id_allocated;
};
struct lpuart_soc_data {
@@ -2422,19 +2423,6 @@ static int lpuart_probe(struct platform_device *pdev)
if (!sport)
return -ENOMEM;
- ret = of_alias_get_id(np, "serial");
- if (ret < 0) {
- ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
- if (ret < 0) {
- dev_err(&pdev->dev, "port line is full, add device failed\n");
- return ret;
- }
- }
- if (ret >= ARRAY_SIZE(lpuart_ports)) {
- dev_err(&pdev->dev, "serial%d out of range\n", ret);
- return -EINVAL;
- }
- sport->port.line = ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sport->port.membase))
@@ -2479,9 +2467,25 @@ static int lpuart_probe(struct platform_device *pdev)
}
}
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "port line is full, add device failed\n");
+ return ret;
+ }
+ sport->id_allocated = true;
+ }
+ if (ret >= ARRAY_SIZE(lpuart_ports)) {
+ dev_err(&pdev->dev, "serial%d out of range\n", ret);
+ ret = -EINVAL;
+ goto failed_out_of_range;
+ }
+ sport->port.line = ret;
+
ret = lpuart_enable_clks(sport);
if (ret)
- return ret;
+ goto failed_clock_enable;
sport->port.uartclk = lpuart_get_baud_clk_rate(sport);
lpuart_ports[sport->port.line] = sport;
@@ -2531,6 +2535,10 @@ static int lpuart_probe(struct platform_device *pdev)
failed_attach_port:
failed_irq_request:
lpuart_disable_clks(sport);
+failed_clock_enable:
+failed_out_of_range:
+ if (sport->id_allocated)
+ ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
return ret;
}
@@ -2540,7 +2548,8 @@ static int lpuart_remove(struct platform_device *pdev)
uart_remove_one_port(&lpuart_reg, &sport->port);
- ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
+ if (sport->id_allocated)
+ ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
lpuart_disable_clks(sport);
Since commit 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") the port line number can also be allocated by IDA, but in case of an error the ID will no be removed again. More importantly, any ID will be freed in remove(), even if it wasn't allocated but instead fetched by of_alias_get_id(). If it was not allocated by IDA there will be a warning: WARN(1, "ida_free called for id=%d which is not allocated.\n", id); Move the ID allocation more to the end of the probe() so that we still can use plain return in the first error cases. Fixes: 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") Signed-off-by: Michael Walle <michael@walle.cc> --- drivers/tty/serial/fsl_lpuart.c | 39 ++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 15 deletions(-)