diff mbox series

[PATCHv2] serial: uartps: Add monitoring TACTIVE bit in set_termios

Message ID 1578398223-27523-1-git-send-email-shubhrajyoti.datta@gmail.com
State New
Headers show
Series [PATCHv2] serial: uartps: Add monitoring TACTIVE bit in set_termios | expand

Commit Message

Shubhrajyoti Datta Jan. 7, 2020, 11:57 a.m. UTC
From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>

Before setting up baud rate in set_termios function, make sure
all the data is shifted out from the Uart transmitter by
monitoring TACTIVE bit in the channel status register.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
v2: fix the signed-off

 drivers/tty/serial/xilinx_uartps.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 4e55bc3..7424f33 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -690,11 +690,15 @@  static void cdns_uart_set_termios(struct uart_port *port,
 	unsigned int ctrl_reg, mode_reg, val;
 	int err;
 
-	/* Wait for the transmit FIFO to empty before making changes */
+	/* Wait for the transmit FIFO to empty and Transmitter to shift out
+	 * all the data before making changes
+	 */
 	if (!(readl(port->membase + CDNS_UART_CR) &
 				CDNS_UART_CR_TX_DIS)) {
 		err = readl_poll_timeout(port->membase + CDNS_UART_SR,
-					 val, (val & CDNS_UART_SR_TXEMPTY),
+					 val, ((val & (CDNS_UART_SR_TXEMPTY |
+					 CDNS_UART_SR_TACTIVE)) ==
+					 CDNS_UART_SR_TXEMPTY),
 					 1000, TX_TIMEOUT);
 		if (err) {
 			dev_err(port->dev, "timed out waiting for tx empty");