@@ -192,7 +192,8 @@ static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
writel(word_len, se->base + SE_SPI_WORD_LEN);
}
-static int geni_spi_set_clock(struct spi_geni_master *mas, unsigned long clk_hz)
+static int geni_spi_set_clock_and_bw(struct spi_geni_master *mas,
+ unsigned long clk_hz)
{
u32 clk_sel, m_clk_cfg, idx, div;
struct geni_se *se = &mas->se;
@@ -218,6 +219,12 @@ static int geni_spi_set_clock(struct spi_geni_master *mas, unsigned long clk_hz)
writel(clk_sel, se->base + SE_GENI_CLK_SEL);
writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+ /* Set BW quota for CPU as driver supports FIFO mode only. */
+ se->icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(mas->cur_speed_hz);
+ ret = geni_icc_set_bw(se);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -259,7 +266,7 @@ static int setup_fifo_params(struct spi_device *spi_slv,
writel(cpol, se->base + SE_SPI_CPOL);
writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
- return geni_spi_set_clock(mas, spi_slv->max_speed_hz);
+ return geni_spi_set_clock_and_bw(mas, spi_slv->max_speed_hz);
}
static int spi_geni_prepare_message(struct spi_master *spi,
@@ -346,7 +353,7 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
/* Speed and bits per word can be overridden per transfer */
if (xfer->speed_hz != mas->cur_speed_hz) {
- ret = geni_spi_set_clock(mas, xfer->speed_hz);
+ ret = geni_spi_set_clock_and_bw(mas, xfer->speed_hz);
if (ret)
return;
}
@@ -620,6 +627,17 @@ static int spi_geni_probe(struct platform_device *pdev)
spin_lock_init(&mas->lock);
pm_runtime_enable(dev);
+ ret = geni_icc_get(&mas->se, NULL);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+ /* Set the bus quota to a reasonable value for register access */
+ mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
+ mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+
+ ret = geni_icc_set_bw(&mas->se);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+
ret = spi_geni_init(mas);
if (ret)
goto spi_geni_probe_runtime_disable;
@@ -658,14 +676,24 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
{
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ ret = geni_se_resources_off(&mas->se);
+ if (ret)
+ return ret;
- return geni_se_resources_off(&mas->se);
+ return geni_icc_disable(&mas->se);
}
static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
{
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ ret = geni_icc_enable(&mas->se);
+ if (ret)
+ return ret;
return geni_se_resources_on(&mas->se);
}
Get the interconnect paths for SPI based Serial Engine device and vote according to the current bus speed of the driver. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V2: - As per Bjorn's comment, removed se == NULL check from geni_spi_icc_get - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting path handle - As per Matthias comment, added error handling for icc_set_bw call Changes in V3: - As per Matthias's comment, use helper ICC function from geni-se driver. Changes in V4: - Move peak_bw guess as twice of avg_bw if nothing mentioned explicitly to ICC core. Changes in V5: - Use icc_enable/disable in power on/off call. - Save some non-zero avg/peak value to ICC core by calling geni_icc_set_bw from probe so that when resume/icc_enable is called NOC are running at some non-zero value. No need to call icc_disable after BW vote because device will resume and suspend before probe return and will leave ICC in disabled state. Changes in V6: - No change Changes in V7: - As per Matthias's comment removed usage of peak_bw variable because we don't have explicit peak requirement, we were voting peak = avg and this can be tracked using single variable for avg bw. Changes in V8: - Adjust ICC vote per transfer, in multimessage transfer scenario. - Move ICC voting to common API "geni_spi_set_clock_and_bw". drivers/spi/spi-geni-qcom.c | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-)