diff mbox series

[v4,7/7] rtw88: 8821c: add phy calibration

Message ID 20200616091625.26489-8-yhchuang@realtek.com
State Superseded
Headers show
Series [v4,1/7] rtw88: 8821c: add basic functions | expand

Commit Message

Tony Chuang June 16, 2020, 9:16 a.m. UTC
From: Tzu-En Huang <tehuang@realtek.com>

In order to get a better TX EVM, do calibration after association.

The calibration needed for 8821c is the IQK, which is done in the
firmware. Implement the rtw_chip_ops::phy_calibration() to trigger
firmware to calibrate.

Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index ffcb427468d7..4bd4164d23ef 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -563,6 +563,39 @@  static void rtw8821c_false_alarm_statistics(struct rtw_dev *rtwdev)
 	rtw_write32_clr(rtwdev, REG_CNTRST, BIT(0));
 }
 
+static void rtw8821c_do_iqk(struct rtw_dev *rtwdev)
+{
+	static int do_iqk_cnt;
+	struct rtw_iqk_para para = {.clear = 0, .segment_iqk = 0};
+	u32 rf_reg, iqk_fail_mask;
+	int counter;
+	bool reload;
+
+	if (rtw_is_assoc(rtwdev))
+		para.segment_iqk = 1;
+
+	rtw_fw_do_iqk(rtwdev, &para);
+
+	for (counter = 0; counter < 300; counter++) {
+		rf_reg = rtw_read_rf(rtwdev, RF_PATH_A, RF_DTXLOK, RFREG_MASK);
+		if (rf_reg == 0xabcde)
+			break;
+		msleep(20);
+	}
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_DTXLOK, RFREG_MASK, 0x0);
+
+	reload = !!rtw_read32_mask(rtwdev, REG_IQKFAILMSK, BIT(16));
+	iqk_fail_mask = rtw_read32_mask(rtwdev, REG_IQKFAILMSK, GENMASK(7, 0));
+	rtw_dbg(rtwdev, RTW_DBG_PHY,
+		"iqk counter=%d reload=%d do_iqk_cnt=%d n_iqk_fail(mask)=0x%02x\n",
+		counter, reload, ++do_iqk_cnt, iqk_fail_mask);
+}
+
+static void rtw8821c_phy_calibration(struct rtw_dev *rtwdev)
+{
+	rtw8821c_do_iqk(rtwdev);
+}
+
 static struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8821c[] = {
 	{0x0086,
 	 RTW_PWR_CUT_ALL_MSK,
@@ -1001,6 +1034,7 @@  static struct rtw_chip_ops rtw8821c_ops = {
 	.set_tx_power_index	= rtw8821c_set_tx_power_index,
 	.cfg_ldo25		= rtw8821c_cfg_ldo25,
 	.false_alarm_statistics	= rtw8821c_false_alarm_statistics,
+	.phy_calibration	= rtw8821c_phy_calibration,
 };
 
 struct rtw_chip_info rtw8821c_hw_spec = {