@@ -139,7 +139,7 @@ static const struct mmc_fixup sdio_fixup_methods[] = {
SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0,
add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING),
- SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887WLAN,
+ SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887_F0,
add_limit_rate_quirk, 150000000),
END_FIXUP
@@ -59,7 +59,7 @@
#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104
#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105
#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128
-#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134
+#define SDIO_DEVICE_ID_MARVELL_8887_F0 0x9134
#define SDIO_VENDOR_ID_MEDIATEK 0x037a
Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is accessed by function ID 0. So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as it does not refer to wlan function. It refers to function 0. Wlan module on this SDIO card is available at function ID 1 and is identified by different SDIO device ID 0x9135. Kernel quirks for SDIO devices are matched against device ID from SDIO Common CIS. Therefore device ID used in quirk is correct, just has misleading name. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/mmc/core/quirks.h | 2 +- include/linux/mmc/sdio_ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)