diff mbox series

[6/9] ath11k: set psc channel flag when sending channel list to firmware.

Message ID 20200518164424.29497-7-pradeepc@codeaurora.org
State New
Headers show
Series None | expand

Commit Message

Pradeep Kumar Chitrapu May 18, 2020, 4:44 p.m. UTC
If 6 ghz channel is a Preferred Scanning Channel(PSC), mark
the channel flag accordingly when updating channel list to firmware.
This will be used when making scanning decision in 6GHz channels.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/reg.c | 4 ++++
 drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 453aa9c06969..50d13a5d7cf8 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -161,6 +161,10 @@  int ath11k_reg_update_chan_list(struct ath11k *ar)
 			else
 				ch->phy_mode = MODE_11A;
 
+			if (channel->band == NL80211_BAND_6GHZ &&
+			    channel->flags & IEEE80211_CHAN_PSC)
+				ch->psc_channel = true;
+
 			ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
 				   "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
 				   i, params->nallchans,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index fd82cff7537b..76c2da2c5db7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2520,7 +2520,8 @@  struct channel_param {
 	    allow_ht:1,
 	    allow_vht:1,
 	    allow_he:1,
-	    set_agile:1;
+	    set_agile:1,
+	    psc_channel:1;
 	u32 phy_mode;
 	u32 cfreq1;
 	u32 cfreq2;