@@ -533,6 +533,7 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
struct cfg80211_chan_def *chandef = &local->_oper_chandef;
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = chandef->chan->center_freq;
+ chandef->freq1_offset = chandef->chan->freq_offset;
chandef->center_freq2 = 0;
/* NOTE: Disabling radar is only valid here for
@@ -104,13 +104,15 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
chandef.chan = local->tmp_channel;
chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
chandef.center_freq1 = chandef.chan->center_freq;
+ chandef.freq1_offset = chandef.chan->freq_offset;
} else
chandef = local->_oper_chandef;
WARN(!cfg80211_chandef_valid(&chandef),
- "control:%d MHz width:%d center: %d/%d MHz",
- chandef.chan->center_freq, chandef.width,
- chandef.center_freq1, chandef.center_freq2);
+ "control:%d.%03d MHz width:%d center: %d.%03d/%d MHz",
+ chandef.chan->center_freq, chandef.chan->freq_offset,
+ chandef.width, chandef.center_freq1, chandef.freq1_offset,
+ chandef.center_freq2);
if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
@@ -162,6 +162,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
chandef->chan = channel;
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = channel->center_freq;
+ chandef->freq1_offset = channel->freq_offset;
if (!ht_oper || !sta_ht_cap.ht_supported) {
ret = IEEE80211_STA_DISABLE_HT |
@@ -396,9 +397,12 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
return 0;
sdata_info(sdata,
- "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
- ifmgd->bssid, chandef.chan->center_freq, chandef.width,
- chandef.center_freq1, chandef.center_freq2);
+ "AP %pM changed bandwidth, new config is %d.%03d MHz, "
+ "width %d (%d.%03d/%d MHz)\n",
+ ifmgd->bssid, chandef.chan->center_freq,
+ chandef.chan->freq_offset, chandef.width,
+ chandef.center_freq1, chandef.freq1_offset,
+ chandef.center_freq2);
if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
IEEE80211_STA_DISABLE_VHT |
@@ -1364,10 +1368,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
IEEE80211_CHAN_DISABLED)) {
sdata_info(sdata,
- "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+ "AP %pM switches to unsupported channel "
+ "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
+ "disconnecting\n",
ifmgd->associated->bssid,
csa_ie.chandef.chan->center_freq,
+ csa_ie.chandef.chan->freq_offset,
csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+ csa_ie.chandef.freq1_offset,
csa_ie.chandef.center_freq2);
ieee80211_queue_work(&local->hw,
&ifmgd->csa_connection_drop_work);
@@ -896,6 +896,7 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
local->scan_chandef.chan = chan;
local->scan_chandef.center_freq1 = chan->center_freq;
+ local->scan_chandef.freq1_offset = chan->freq_offset;
local->scan_chandef.center_freq2 = 0;
switch (scan_req->scan_width) {
case NL80211_BSS_CHAN_WIDTH_5:
@@ -37,32 +37,42 @@
#define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
#define CHANDEF_ENTRY __field(u32, control_freq) \
+ __field(u32, freq_offset) \
__field(u32, chan_width) \
__field(u32, center_freq1) \
+ __field(u32, freq1_offset) \
__field(u32, center_freq2)
#define CHANDEF_ASSIGN(c) \
__entry->control_freq = (c) ? ((c)->chan ? (c)->chan->center_freq : 0) : 0; \
+ __entry->freq_offset = (c) ? ((c)->chan ? (c)->chan->freq_offset : 0) : 0; \
__entry->chan_width = (c) ? (c)->width : 0; \
__entry->center_freq1 = (c) ? (c)->center_freq1 : 0; \
+ __entry->freq1_offset = (c) ? (c)->freq1_offset : 0; \
__entry->center_freq2 = (c) ? (c)->center_freq2 : 0;
-#define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz"
-#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \
- __entry->center_freq1, __entry->center_freq2
+#define CHANDEF_PR_FMT " control:%d.%03d MHz width:%d center: %d.%03d/%d MHz"
+#define CHANDEF_PR_ARG __entry->control_freq, __entry->freq_offset, __entry->chan_width, \
+ __entry->center_freq1, __entry->freq1_offset, __entry->center_freq2
#define MIN_CHANDEF_ENTRY \
__field(u32, min_control_freq) \
+ __field(u32, min_freq_offset) \
__field(u32, min_chan_width) \
__field(u32, min_center_freq1) \
+ __field(u32, min_freq1_offset) \
__field(u32, min_center_freq2)
#define MIN_CHANDEF_ASSIGN(c) \
__entry->min_control_freq = (c)->chan ? (c)->chan->center_freq : 0; \
+ __entry->min_freq_offset = (c)->chan ? (c)->chan->freq_offset : 0; \
__entry->min_chan_width = (c)->width; \
__entry->min_center_freq1 = (c)->center_freq1; \
+ __entry->freq1_offset = (c)->freq1_offset; \
__entry->min_center_freq2 = (c)->center_freq2;
-#define MIN_CHANDEF_PR_FMT " min_control:%d MHz min_width:%d min_center: %d/%d MHz"
-#define MIN_CHANDEF_PR_ARG __entry->min_control_freq, __entry->min_chan_width, \
- __entry->min_center_freq1, __entry->min_center_freq2
+#define MIN_CHANDEF_PR_FMT " min_control:%d.%03d MHz min_width:%d min_center: %d.%03d/%d MHz"
+#define MIN_CHANDEF_PR_ARG __entry->min_control_freq, __entry->min_freq_offset, \
+ __entry->min_chan_width, \
+ __entry->min_center_freq1, __entry->min_freq1_offset, \
+ __entry->min_center_freq2
#define CHANCTX_ENTRY CHANDEF_ENTRY \
MIN_CHANDEF_ENTRY \
@@ -412,6 +422,7 @@ TRACE_EVENT(drv_bss_info_changed,
__field(s32, cqm_rssi_hyst)
__field(u32, channel_width)
__field(u32, channel_cfreq1)
+ __field(u32, channel_cfreq1_offset)
__dynamic_array(u32, arp_addr_list,
info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
IEEE80211_BSS_ARP_ADDR_LIST_LEN :
@@ -452,6 +463,7 @@ TRACE_EVENT(drv_bss_info_changed,
__entry->cqm_rssi_hyst = info->cqm_rssi_hyst;
__entry->channel_width = info->chandef.width;
__entry->channel_cfreq1 = info->chandef.center_freq1;
+ __entry->channel_cfreq1_offset = info->chandef.freq1_offset;
__entry->arp_addr_cnt = info->arp_addr_cnt;
memcpy(__get_dynamic_array(arp_addr_list), info->arp_addr_list,
sizeof(u32) * (info->arp_addr_cnt > IEEE80211_BSS_ARP_ADDR_LIST_LEN ?
@@ -1223,6 +1235,7 @@ TRACE_EVENT(drv_remain_on_channel,
LOCAL_ENTRY
VIF_ENTRY
__field(int, center_freq)
+ __field(int, freq_offset)
__field(unsigned int, duration)
__field(u32, type)
),
@@ -1231,14 +1244,16 @@ TRACE_EVENT(drv_remain_on_channel,
LOCAL_ASSIGN;
VIF_ASSIGN;
__entry->center_freq = chan->center_freq;
+ __entry->freq_offset = chan->freq_offset;
__entry->duration = duration;
__entry->type = type;
),
TP_printk(
- LOCAL_PR_FMT VIF_PR_FMT " freq:%dMHz duration:%dms type=%d",
+ LOCAL_PR_FMT VIF_PR_FMT " freq:%d.%03dMHz duration:%dms type=%d",
LOCAL_PR_ARG, VIF_PR_ARG,
- __entry->center_freq, __entry->duration, __entry->type
+ __entry->center_freq, __entry->freq_offset,
+ __entry->duration, __entry->type
)
);
@@ -1546,8 +1561,10 @@ struct trace_vif_entry {
struct trace_chandef_entry {
u32 control_freq;
+ u32 freq_offset;
u32 chan_width;
u32 center_freq1;
+ u32 freq1_offset;
u32 center_freq2;
} __packed;
@@ -1597,18 +1614,26 @@ TRACE_EVENT(drv_switch_vif_chanctx,
sizeof(local_vifs[i].vif.vif_name));
SWITCH_ENTRY_ASSIGN(old_chandef.control_freq,
old_ctx->def.chan->center_freq);
+ SWITCH_ENTRY_ASSIGN(old_chandef.freq_offset,
+ old_ctx->def.chan->freq_offset);
SWITCH_ENTRY_ASSIGN(old_chandef.chan_width,
old_ctx->def.width);
SWITCH_ENTRY_ASSIGN(old_chandef.center_freq1,
old_ctx->def.center_freq1);
+ SWITCH_ENTRY_ASSIGN(old_chandef.freq1_offset,
+ old_ctx->def.freq1_offset);
SWITCH_ENTRY_ASSIGN(old_chandef.center_freq2,
old_ctx->def.center_freq2);
SWITCH_ENTRY_ASSIGN(new_chandef.control_freq,
new_ctx->def.chan->center_freq);
+ SWITCH_ENTRY_ASSIGN(new_chandef.freq_offset,
+ new_ctx->def.chan->freq_offset);
SWITCH_ENTRY_ASSIGN(new_chandef.chan_width,
new_ctx->def.width);
SWITCH_ENTRY_ASSIGN(new_chandef.center_freq1,
new_ctx->def.center_freq1);
+ SWITCH_ENTRY_ASSIGN(new_chandef.freq1_offset,
+ new_ctx->def.freq1_offset);
SWITCH_ENTRY_ASSIGN(new_chandef.center_freq2,
new_ctx->def.center_freq2);
}
cfg80211_chan_def and ieee80211_channel recently gained a frequency offset component. Handle this where it makes sense (potentially required by S1G channels), ie. ignore for mesh, ibss, HT/VHT specific stuff, TDLS, etc. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> --- net/mac80211/chan.c | 1 + net/mac80211/main.c | 8 +++++--- net/mac80211/mlme.c | 16 ++++++++++++---- net/mac80211/scan.c | 1 + net/mac80211/trace.h | 41 +++++++++++++++++++++++++++++++++-------- 5 files changed, 52 insertions(+), 15 deletions(-)