@@ -1463,6 +1463,8 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
struct ethtool_pauseparam *pause)
{
struct phylink_link_state *config = &pl->link_config;
+ bool manual_changed;
+ int pause_state;
ASSERT_RTNL();
@@ -1477,15 +1479,15 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
!pause->autoneg && pause->rx_pause != pause->tx_pause)
return -EINVAL;
- mutex_lock(&pl->state_mutex);
- config->pause = 0;
+ pause_state = 0;
if (pause->autoneg)
- config->pause |= MLO_PAUSE_AN;
+ pause_state |= MLO_PAUSE_AN;
if (pause->rx_pause)
- config->pause |= MLO_PAUSE_RX;
+ pause_state |= MLO_PAUSE_RX;
if (pause->tx_pause)
- config->pause |= MLO_PAUSE_TX;
+ pause_state |= MLO_PAUSE_TX;
+ mutex_lock(&pl->state_mutex);
/*
* See the comments for linkmode_set_pause(), wrt the deficiencies
* with the current implementation. A solution to this issue would
@@ -1502,6 +1504,12 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
linkmode_set_pause(config->advertising, pause->tx_pause,
pause->rx_pause);
+ manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN ||
+ (!(pause_state & MLO_PAUSE_AN) &&
+ (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK);
+
+ config->pause = pause_state;
+
if (!pl->phydev && !test_bit(PHYLINK_DISABLE_STOPPED,
&pl->phylink_disable_state))
phylink_pcs_config(pl, true, &pl->link_config);
@@ -1517,6 +1525,15 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
phy_set_asym_pause(pl->phydev, pause->rx_pause,
pause->tx_pause);
+ /* If the manual pause settings changed, make sure we trigger a
+ * resolve to update their state; we can not guarantee that the
+ * link will cycle.
+ */
+ if (manual_changed) {
+ pl->mac_link_dropped = true;
+ phylink_run_resolve(pl);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
We have been relying on link events and mac_config() when the manual pause modes are changed. With recent developments, such as moving the programming of link state to mac_link_up(), this no longer works. To ensure that we update the MAC, we must generate a link-down followed by a link-up event; we can do that by setting mac_link_dropped and triggering a resolve. Fixes: 91a208f2185a ("net: phylink: propagate resolved link config via mac_link_up()") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/phylink.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)