diff mbox series

[net-next,v5,1/4] dt-bindings: net: Add tx and rx internal delays

Message ID 20200602164522.3276-2-dmurphy@ti.com
State New
Headers show
Series RGMII Internal delay common property | expand

Commit Message

Dan Murphy June 2, 2020, 4:45 p.m. UTC 
tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.

These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid.  These modes indicate to the
controller that the PHY will add the internal delay for the connection.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/net/ethernet-phy.yaml       | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 9b1f1147ca36..edd0245d132b 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -162,6 +162,19 @@  properties:
     description:
       Specifies a reference to a node representing a SFP cage.
 
+
+  rx-internal-delay-ps:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable RX internal delays.
+
+  tx-internal-delay-ps:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable TX internal delays.
+
 required:
   - reg