diff mbox series

[08/11] ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi

Message ID 20200505140231.16600-9-brgl@bgdev.pl
State New
Headers show
Series [01/11] dt-bindings: add a binding document for MediaTek PERICFG controller | expand

Commit Message

Bartosz Golaszewski May 5, 2020, 2:02 p.m. UTC 
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common
to all the boards based on this SoC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 8cedaf74ae86..89af661e7f63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -406,6 +406,18 @@  mmc2: mmc@11170000 {
 			status = "disabled";
 		};
 
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
 		rng: rng@1020c000 {
 			compatible = "mediatek,mt8516-rng",
 				     "mediatek,mt7623-rng";