diff mbox series

[net-next,v1,2/9] net: phy: Add support for polling cable test

Message ID 20200425180621.1140452-3-andrew@lunn.ch
State New
Headers show
Series None | expand

Commit Message

Andrew Lunn April 25, 2020, 6:06 p.m. UTC
Some PHYs are not capable of generating interrupts when a cable test
finished. They do however support interrupts for normal operations,
like link up/down. As such, the PHY state machine would normally not
poll the PHY.

Add support for indicating the PHY state machine must poll the PHY
when performing a cable test.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy.c | 2 ++
 include/linux/phy.h   | 5 +++++
 2 files changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 4a6279c4a3a3..242a7c1c4b6c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -510,6 +510,8 @@  int phy_start_cable_test(struct phy_device *phydev,
 
 	phydev->state = PHY_CABLETEST;
 
+	if (phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
 out:
 	mutex_unlock(&phydev->lock);
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 916a5eb969a1..593da2c6041d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -78,6 +78,7 @@  extern const int phy_10gbit_features_array[1];
 
 #define PHY_IS_INTERNAL		0x00000001
 #define PHY_RST_AFTER_CLK_EN	0x00000002
+#define PHY_POLL_CABLE_TEST	0x00000004
 #define MDIO_DEVICE_IS_PHY	0x80000000
 
 /* Interface Mode definitions */
@@ -1025,6 +1026,10 @@  static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
  */
 static inline bool phy_polling_mode(struct phy_device *phydev)
 {
+	if (phydev->state == PHY_CABLETEST)
+		if (phydev->drv->flags & PHY_POLL_CABLE_TEST)
+			return true;
+
 	return phydev->irq == PHY_POLL;
 }