diff mbox

[v5,1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls

Message ID 1386854770-2173-2-git-send-email-mporter@linaro.org
State Superseded
Headers show

Commit Message

Matt Porter Dec. 12, 2013, 1:26 p.m. UTC
This adds a pair of APIs that allows the generic PHY subsystem to
provide information on the PHY bus width. The PHY provider driver may
use phy_set_bus_width() to set the bus width that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY bus width in order to properly configure the controller.

Signed-off-by: Matt Porter <mporter@linaro.org>
---
 include/linux/phy/phy.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Felipe Balbi Dec. 12, 2013, 6:18 p.m. UTC | #1
Hi,

On Thu, Dec 12, 2013 at 08:26:02AM -0500, Matt Porter wrote:
> This adds a pair of APIs that allows the generic PHY subsystem to
> provide information on the PHY bus width. The PHY provider driver may
> use phy_set_bus_width() to set the bus width that the PHY supports.
> The controller driver may then use phy_get_bus_width() to fetch the
> PHY bus width in order to properly configure the controller.
> 
> Signed-off-by: Matt Porter <mporter@linaro.org>

Kishon, I need your Acked-by here, if you're ok with the change.
Kishon Vijay Abraham I Dec. 13, 2013, 9:55 a.m. UTC | #2
On Thursday 12 December 2013 11:48 PM, Felipe Balbi wrote:
> Hi,
> 
> On Thu, Dec 12, 2013 at 08:26:02AM -0500, Matt Porter wrote:
>> This adds a pair of APIs that allows the generic PHY subsystem to
>> provide information on the PHY bus width. The PHY provider driver may
>> use phy_set_bus_width() to set the bus width that the PHY supports.
>> The controller driver may then use phy_get_bus_width() to fetch the
>> PHY bus width in order to properly configure the controller.
>>
>> Signed-off-by: Matt Porter <mporter@linaro.org>
> 
> Kishon, I need your Acked-by here, if you're ok with the change.

here it goes..
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
>
diff mbox

Patch

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 6d72269..e273e5a 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -38,6 +38,14 @@  struct phy_ops {
 };
 
 /**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ */
+struct phy_attrs {
+	u32			bus_width;
+};
+
+/**
  * struct phy - represents the phy device
  * @dev: phy device
  * @id: id of the phy device
@@ -46,6 +54,7 @@  struct phy_ops {
  * @mutex: mutex to protect phy_ops
  * @init_count: used to protect when the PHY is used by multiple consumers
  * @power_count: used to protect when the PHY is used by multiple consumers
+ * @phy_attrs: used to specify PHY specific attributes
  */
 struct phy {
 	struct device		dev;
@@ -55,6 +64,7 @@  struct phy {
 	struct mutex		mutex;
 	int			init_count;
 	int			power_count;
+	struct phy_attrs	attrs;
 };
 
 /**
@@ -127,6 +137,14 @@  int phy_init(struct phy *phy);
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return phy->attrs.bus_width;
+}
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	phy->attrs.bus_width = bus_width;
+}
 struct phy *phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 void phy_put(struct phy *phy);
@@ -199,6 +217,16 @@  static inline int phy_power_off(struct phy *phy)
 	return -ENOSYS;
 }
 
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	return;
+}
+
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
 	return ERR_PTR(-ENOSYS);