@@ -88,8 +88,8 @@ static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
u8 *guid);
-static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux);
-static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
+static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port);
+static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port);
static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
#define DBG_PREFIX "[dp_mst]"
@@ -1993,7 +1993,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
}
/* remove i2c over sideband */
- drm_dp_mst_unregister_i2c_bus(&port->aux);
+ drm_dp_mst_unregister_i2c_bus(port);
} else {
mutex_lock(&mgr->lock);
drm_dp_mst_topology_put_mstb(port->mstb);
@@ -2008,7 +2008,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
if (port->pdt != DP_PEER_DEVICE_NONE) {
if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) {
/* add i2c over sideband */
- ret = drm_dp_mst_register_i2c_bus(&port->aux);
+ ret = drm_dp_mst_register_i2c_bus(port);
} else {
lct = drm_dp_calculate_rad(port, rad);
mstb = drm_dp_add_mst_branch_device(lct, rad);
@@ -5375,22 +5375,26 @@ static const struct i2c_algorithm drm_dp_mst_i2c_algo = {
/**
* drm_dp_mst_register_i2c_bus() - register an I2C adapter for I2C-over-AUX
- * @aux: DisplayPort AUX channel
+ * @port: The port to add the I2C bus on
*
* Returns 0 on success or a negative error code on failure.
*/
-static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
+static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port)
{
+ struct drm_dp_aux *aux = &port->aux;
+ struct device *parent_dev = port->mgr->dev->dev;
+
aux->ddc.algo = &drm_dp_mst_i2c_algo;
aux->ddc.algo_data = aux;
aux->ddc.retries = 3;
aux->ddc.class = I2C_CLASS_DDC;
aux->ddc.owner = THIS_MODULE;
- aux->ddc.dev.parent = aux->dev;
- aux->ddc.dev.of_node = aux->dev->of_node;
+ /* FIXME: set the kdev of the port's connector as parent */
+ aux->ddc.dev.parent = parent_dev;
+ aux->ddc.dev.of_node = parent_dev->of_node;
- strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev),
+ strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(parent_dev),
sizeof(aux->ddc.name));
return i2c_add_adapter(&aux->ddc);
@@ -5398,11 +5402,11 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
/**
* drm_dp_mst_unregister_i2c_bus() - unregister an I2C-over-AUX adapter
- * @aux: DisplayPort AUX channel
+ * @port: The port to remove the I2C bus from
*/
-static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux)
+static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port)
{
- i2c_del_adapter(&aux->ddc);
+ i2c_del_adapter(&port->aux.ddc);
}
/**
During the initial MST probing an MST port's I2C device will be registered using the kdev of the DRM device as a parent. Later after MST Connection Status Notifications this I2C device will be re-registered with the kdev of the port's connector. This will also move inconsistently the I2C device's sysfs entry from the DRM device's sysfs dir to the connector's dir. Fix the above by keeping the DRM kdev as the parent of the I2C device. Ideally the connector's kdev would be used as a parent, similarly to non-MST connectors, however that needs some more refactoring to ensure the connector's kdev is already available early enough. So keep the existing (initial) behavior for now. Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 28 +++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-)