diff mbox

[2/2] mmc: core: Enable MMC_CAP2_CACHE_CTRL as default

Message ID 1387364961-15464-2-git-send-email-ulf.hansson@linaro.org
State Superseded
Headers show

Commit Message

Ulf Hansson Dec. 18, 2013, 11:09 a.m. UTC 
There are no reason to why the use of a non-volatile internal eMMC
cache should be controlled by a host cap. Instead let's just enable it
if the eMMC card supports it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/core.c  |    3 ---
 drivers/mmc/core/mmc.c   |    3 +--
 include/linux/mmc/host.h |    1 -
 3 files changed, 1 insertion(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index df591a9..66ec347 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2585,9 +2585,6 @@  int mmc_flush_cache(struct mmc_card *card)
 	struct mmc_host *host = card->host;
 	int err = 0;
 
-	if (!(host->caps2 & MMC_CAP2_CACHE_CTRL))
-		return err;
-
 	if (mmc_card_mmc(card) &&
 			(card->ext_csd.cache_size > 0) &&
 			(card->ext_csd.cache_ctrl & 1)) {
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index ef1cc73..7ab3e9c 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1287,8 +1287,7 @@  static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 * If cache size is higher than 0, this indicates
 	 * the existence of cache and it can be turned on.
 	 */
-	if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
-			card->ext_csd.cache_size > 0) {
+	if (card->ext_csd.cache_size > 0) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_CACHE_CTRL, 1,
 				card->ext_csd.generic_cmd6_time);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index f539bc7..8383e3f 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -264,7 +264,6 @@  struct mmc_host {
 	u32			caps2;		/* More host capabilities */
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
-#define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
 #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
 #define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */