diff mbox series

[5.5,057/170] net/mlx5e: Enhance ICOSQ WQE info fields

Message ID 20200331085430.648058662@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman March 31, 2020, 8:57 a.m. UTC 
From: Aya Levin <ayal@mellanox.com>

[ Upstream commit 1de0306c3a05d305e45b1f1fabe2f4e94222eb6b ]

Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the
number of WQEBBs on WQE post, and increment the consumer counter (cc)
on completion.

In case of error completions, the cc was mistakenly not incremented,
keeping a gap between cc and pc (producer counter). This failed the
recovery flow on the ICOSQ from a CQE error which timed-out waiting for
the cc and pc to meet.

Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h      |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c   |   11 +++++------
 drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c |    1 +
 3 files changed, 7 insertions(+), 6 deletions(-)
diff mbox series

Patch

--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -371,6 +371,7 @@  enum {
 
 struct mlx5e_sq_wqe_info {
 	u8  opcode;
+	u8 num_wqebbs;
 
 	/* Auxiliary data for different opcodes. */
 	union {
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -477,6 +477,7 @@  static inline void mlx5e_fill_icosq_frag
 	/* fill sq frag edge with nops to avoid wqe wrapping two pages */
 	for (; wi < edge_wi; wi++) {
 		wi->opcode = MLX5_OPCODE_NOP;
+		wi->num_wqebbs = 1;
 		mlx5e_post_nop(wq, sq->sqn, &sq->pc);
 	}
 }
@@ -525,6 +526,7 @@  static int mlx5e_alloc_rx_mpwqe(struct m
 	umr_wqe->uctrl.xlt_offset = cpu_to_be16(xlt_offset);
 
 	sq->db.ico_wqe[pi].opcode = MLX5_OPCODE_UMR;
+	sq->db.ico_wqe[pi].num_wqebbs = MLX5E_UMR_WQEBBS;
 	sq->db.ico_wqe[pi].umr.rq = rq;
 	sq->pc += MLX5E_UMR_WQEBBS;
 
@@ -621,6 +623,7 @@  void mlx5e_poll_ico_cq(struct mlx5e_cq *
 
 			ci = mlx5_wq_cyc_ctr2ix(&sq->wq, sqcc);
 			wi = &sq->db.ico_wqe[ci];
+			sqcc += wi->num_wqebbs;
 
 			if (last_wqe && unlikely(get_cqe_opcode(cqe) != MLX5_CQE_REQ)) {
 				netdev_WARN_ONCE(cq->channel->netdev,
@@ -631,16 +634,12 @@  void mlx5e_poll_ico_cq(struct mlx5e_cq *
 				break;
 			}
 
-			if (likely(wi->opcode == MLX5_OPCODE_UMR)) {
-				sqcc += MLX5E_UMR_WQEBBS;
+			if (likely(wi->opcode == MLX5_OPCODE_UMR))
 				wi->umr.rq->mpwqe.umr_completed++;
-			} else if (likely(wi->opcode == MLX5_OPCODE_NOP)) {
-				sqcc++;
-			} else {
+			else if (unlikely(wi->opcode != MLX5_OPCODE_NOP))
 				netdev_WARN_ONCE(cq->channel->netdev,
 						 "Bad OPCODE in ICOSQ WQE info: 0x%x\n",
 						 wi->opcode);
-			}
 
 		} while (!last_wqe);
 
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
@@ -78,6 +78,7 @@  void mlx5e_trigger_irq(struct mlx5e_icos
 	u16 pi = mlx5_wq_cyc_ctr2ix(wq, sq->pc);
 
 	sq->db.ico_wqe[pi].opcode = MLX5_OPCODE_NOP;
+	sq->db.ico_wqe[pi].num_wqebbs = 1;
 	nopwqe = mlx5e_post_nop(wq, sq->sqn, &sq->pc);
 	mlx5e_notify_hw(wq, sq->pc, sq->uar_map, &nopwqe->ctrl);
 }