diff mbox

[07/20] ARM64 / ACPI: Enable ARM64 in Kconfig

Message ID 1389961514-13562-8-git-send-email-hanjun.guo@linaro.org
State New
Headers show

Commit Message

Hanjun Guo Jan. 17, 2014, 12:25 p.m. UTC 
Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.

acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
depends on X86 || IA64, and implement it on ARM/ARM64 in the furture.

In order to make arm-core.c can both run on ARM and ARM64, introduce
CONFIG_ACPI_ARM to support it.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/arm64/Kconfig         |    2 ++
 drivers/acpi/Kconfig       |   11 ++++++++---
 drivers/acpi/plat/Makefile |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)

Comments

Hanjun Guo Jan. 20, 2014, 9:30 a.m. UTC | #1 
On 2014-1-17 22:34, Sudeep Holla wrote:
> On 17/01/14 12:25, Hanjun Guo wrote:
>> Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.
>>
>> acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
>> depends on X86 || IA64, and implement it on ARM/ARM64 in the furture.
>>
>> In order to make arm-core.c can both run on ARM and ARM64, introduce
>> CONFIG_ACPI_ARM to support it.
>>
>> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
>> Signed-off-by: Al Stone <al.stone@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>  arch/arm64/Kconfig         |    2 ++
>>  drivers/acpi/Kconfig       |   11 ++++++++---
>>  drivers/acpi/plat/Makefile |    2 +-
>>  3 files changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 6d4dd22..2b1fb1d 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -279,6 +279,8 @@ source "net/Kconfig"
>>  
>>  source "drivers/Kconfig"
>>  
>> +source "drivers/acpi/Kconfig"
>> +
>>  source "fs/Kconfig"
>>  
>>  source "arch/arm64/kvm/Kconfig"
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index 4770de5..cae5dc9 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -2,13 +2,16 @@
>>  # ACPI Configuration
>>  #
>>  
>> +config ACPI_ARM
>> +	bool
>> +
>>  menuconfig ACPI
>>  	bool "ACPI (Advanced Configuration and Power Interface) Support"
>>  	depends on !IA64_HP_SIM
>> -	depends on IA64 || X86
>> -	depends on PCI
>> +	depends on ((IA64 || X86) && PCI) || ARM64
>>  	select PNP
>> -	default y
>> +	select ACPI_ARM if ARM64
>> +	default y if !ARM64
>>  	help
>>  	  Advanced Configuration and Power Interface (ACPI) support for 
>>  	  Linux requires an ACPI-compliant platform (hardware/firmware),
>> @@ -149,6 +152,7 @@ config ACPI_PROCESSOR
>>  	tristate "Processor"
>>  	select THERMAL
>>  	select CPU_IDLE
>> +	depends on X86 || IA64
> 
> This doesn't look correct to me. You are disabling Perf/Idle/Thermal/Throttling
> support for ARM64. Any particular reason ?

As I said in the change log, acpi_idle driver is x86/IA64 dependent now,
we should revisit it later for these drivers on ARM64.

Since this is the ARM ACPI core patches, I think we can implement it later.

> 
> Also this is conflicting with other change where you are adding/exporting
> boot_option_idle_override which is mainly used in processor_idle and that's
> disabled for ARM64 here.

boot_option_idle_override is used in processor_core.c and it is the common
file used by every processor drivers including the processor_idle driver,
if I didn't introduce boot_option_idle_override there will be compile errors.

Thanks
Hanjun
Catalin Marinas Jan. 23, 2014, 4:39 p.m. UTC | #2 
On Fri, Jan 17, 2014 at 12:25:01PM +0000, Hanjun Guo wrote:
> Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.
> 
> acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
> depends on X86 || IA64, and implement it on ARM/ARM64 in the furture.
> 
> In order to make arm-core.c can both run on ARM and ARM64, introduce
> CONFIG_ACPI_ARM to support it.
> 
> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
> Signed-off-by: Al Stone <al.stone@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  arch/arm64/Kconfig         |    2 ++
>  drivers/acpi/Kconfig       |   11 ++++++++---
>  drivers/acpi/plat/Makefile |    2 +-
>  3 files changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 6d4dd22..2b1fb1d 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -279,6 +279,8 @@ source "net/Kconfig"
>  
>  source "drivers/Kconfig"
>  
> +source "drivers/acpi/Kconfig"
> +
>  source "fs/Kconfig"
>  
>  source "arch/arm64/kvm/Kconfig"
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 4770de5..cae5dc9 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -2,13 +2,16 @@
>  # ACPI Configuration
>  #
>  
> +config ACPI_ARM
> +	bool

Could be better as def_bool ARM64

> +
>  menuconfig ACPI
>  	bool "ACPI (Advanced Configuration and Power Interface) Support"
>  	depends on !IA64_HP_SIM
> -	depends on IA64 || X86
> -	depends on PCI
> +	depends on ((IA64 || X86) && PCI) || ARM64
>  	select PNP
> -	default y
> +	select ACPI_ARM if ARM64

And remove this select here.
Hanjun Guo Jan. 24, 2014, 2:45 p.m. UTC | #3 
On 2014年01月24日 00:39, Catalin Marinas wrote:
> On Fri, Jan 17, 2014 at 12:25:01PM +0000, Hanjun Guo wrote:
>> Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.
>>
>> acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
>> depends on X86 || IA64, and implement it on ARM/ARM64 in the furture.
>>
>> In order to make arm-core.c can both run on ARM and ARM64, introduce
>> CONFIG_ACPI_ARM to support it.
>>
>> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
>> Signed-off-by: Al Stone <al.stone@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>   arch/arm64/Kconfig         |    2 ++
>>   drivers/acpi/Kconfig       |   11 ++++++++---
>>   drivers/acpi/plat/Makefile |    2 +-
>>   3 files changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 6d4dd22..2b1fb1d 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -279,6 +279,8 @@ source "net/Kconfig"
>>   
>>   source "drivers/Kconfig"
>>   
>> +source "drivers/acpi/Kconfig"
>> +
>>   source "fs/Kconfig"
>>   
>>   source "arch/arm64/kvm/Kconfig"
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index 4770de5..cae5dc9 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -2,13 +2,16 @@
>>   # ACPI Configuration
>>   #
>>   
>> +config ACPI_ARM
>> +	bool
> Could be better as def_bool ARM64
>
>> +
>>   menuconfig ACPI
>>   	bool "ACPI (Advanced Configuration and Power Interface) Support"
>>   	depends on !IA64_HP_SIM
>> -	depends on IA64 || X86
>> -	depends on PCI
>> +	depends on ((IA64 || X86) && PCI) || ARM64
>>   	select PNP
>> -	default y
>> +	select ACPI_ARM if ARM64
> And remove this select here.

Thanks for the guidance, will update in next version.

>
diff mbox

Patch

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6d4dd22..2b1fb1d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -279,6 +279,8 @@  source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/acpi/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 4770de5..cae5dc9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -2,13 +2,16 @@ 
 # ACPI Configuration
 #
 
+config ACPI_ARM
+	bool
+
 menuconfig ACPI
 	bool "ACPI (Advanced Configuration and Power Interface) Support"
 	depends on !IA64_HP_SIM
-	depends on IA64 || X86
-	depends on PCI
+	depends on ((IA64 || X86) && PCI) || ARM64
 	select PNP
-	default y
+	select ACPI_ARM if ARM64
+	default y if !ARM64
 	help
 	  Advanced Configuration and Power Interface (ACPI) support for 
 	  Linux requires an ACPI-compliant platform (hardware/firmware),
@@ -149,6 +152,7 @@  config ACPI_PROCESSOR
 	tristate "Processor"
 	select THERMAL
 	select CPU_IDLE
+	depends on X86 || IA64
 	default y
 	help
 	  This driver installs ACPI as the idle handler for Linux and uses
@@ -250,6 +254,7 @@  config ACPI_DEBUG
 config ACPI_PCI_SLOT
 	bool "PCI slot detection driver"
 	depends on SYSFS
+	depends on PCI
 	default n
 	help
 	  This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/acpi/plat/Makefile b/drivers/acpi/plat/Makefile
index 46bc65e..3a61176 100644
--- a/drivers/acpi/plat/Makefile
+++ b/drivers/acpi/plat/Makefile
@@ -1 +1 @@ 
-obj-$(CONFIG_ARM64)	+= arm-core.o
+obj-$(CONFIG_ACPI_ARM)	+= arm-core.o