diff mbox

[12/22] omap4: utility function to identify the context of hw init

Message ID 1298893591-17636-13-git-send-email-aneesh@ti.com
State New
Headers show

Commit Message

Aneesh V Feb. 28, 2011, 11:46 a.m. UTC
The basic hardware init of OMAP4(s_init()) can happen in 4
diff mbox

Patch

different contexts:
 1. SPL running from SRAM
 2. U-Boot running from FLASH
 3. Non-XIP U-Boot loaded to SDRAM by SPL
 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
    Configuration Header feature

What level of hw initialization gets done depends on this
context. Add a utility function to find this context.

Signed-off-by: Aneesh V <aneesh@ti.com>
---
 arch/arm/include/asm/arch-omap4/sys_proto.h |   47 +++++++++++++++++++++++++++
 arch/arm/include/asm/omap_common.h          |    6 +++
 2 files changed, 53 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ce86b36..19da2e1 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -38,6 +38,53 @@  void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 
+static inline u32 running_from_sdram(void)
+{
+	u32 pc;
+	asm volatile ("mov %0, pc" : "=r" (pc));
+	return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+	    (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+	/*
+	 * Configuration Header is not supported yet, so u-boot init running
+	 * from SDRAM implies that it was loaded by SPL. When this situation
+	 * changes one of these approaches could be taken:
+	 * i.  Pass a magic from SPL to U-Boot and U-Boot save it at a known
+	 *     location.
+	 * ii. Check the OPP. CH can support only 50% OPP while SPL initializes
+	 *     the DPLLs at 100% OPP.
+	 */
+	return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap4_hw_init_context(void)
+{
+#ifdef CONFIG_PRELOADER
+	return OMAP_INIT_CONTEXT_SPL;
+#else
+	if (uboot_loaded_by_spl())
+		return OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_SPL;
+	else if (running_from_sdram())
+		return OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_CH;
+	else
+		return OMAP_INIT_CONTEXT_XIP_UBOOT;
+#endif
+}
+
 extern const struct omap_sysinfo sysinfo;
 
 #endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 95116f4..50247af 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -65,6 +65,12 @@ 
 /* Magic number passed from SPL to U-Boot */
 #define OMAP_SPL_TO_UBOOT_MAGIC_NUMBER	0xDEADBEEF
 
+/* HW Init Context */
+#define OMAP_INIT_CONTEXT_SPL			0
+#define OMAP_INIT_CONTEXT_XIP_UBOOT		1
+#define OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_SPL	2
+#define OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_CH	3
+
 u32 omap_boot_device(void);
 u32 omap_boot_mode(void);
 void preloader_console_init(void);