diff mbox series

[4.19,082/115] HID: i2c-hid: Reset ALPS touchpads on resume

Message ID 20200107205305.171742306@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Jan. 7, 2020, 8:54 p.m. UTC 
From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit fd70466d37bf3fe0118d18c56ddde85b428f86cf upstream.

Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system
resume") fixes many touchpads and touchscreens, however ALPS touchpads
start to trigger IRQ storm after system resume.

Since it's total silence from ALPS, let's bring the old behavior back
to ALPS touchpads.

Fixes: 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/i2c-hid/i2c-hid-core.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -51,6 +51,7 @@ 
 #define I2C_HID_QUIRK_NO_RUNTIME_PM		BIT(2)
 #define I2C_HID_QUIRK_DELAY_AFTER_SLEEP		BIT(3)
 #define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
+#define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
 
 /* flags */
 #define I2C_HID_STARTED		0
@@ -182,6 +183,8 @@  static const struct i2c_hid_quirks {
 		I2C_HID_QUIRK_NO_RUNTIME_PM },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
 		 I2C_HID_QUIRK_BOGUS_IRQ },
+	{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
+		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ 0, 0 }
 };
 
@@ -1290,8 +1293,15 @@  static int i2c_hid_resume(struct device
 	 * solves "incomplete reports" on Raydium devices 2386:3118 and
 	 * 2386:4B33 and fixes various SIS touchscreens no longer sending
 	 * data after a suspend/resume.
+	 *
+	 * However some ALPS touchpads generate IRQ storm without reset, so
+	 * let's still reset them here.
 	 */
-	ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+	if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
+		ret = i2c_hid_hwreset(client);
+	else
+		ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+
 	if (ret)
 		return ret;