diff mbox series

[v2,1/2] scsi: scsi_debug: Add check for sdebug_max_queue during module init

Message ID 1594297400-24756-2-git-send-email-john.garry@huawei.com
State New
Headers show
Series scsi: scsi_debug: Support hostwide tags and a fix | expand

Commit Message

John Garry July 9, 2020, 12:23 p.m. UTC
sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like
this can be triggered by passing an out-of-range value:

Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 
 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--) 
 pc : schedule_resp+0x2a4/0xa70 [scsi_debug] 
 lr : schedule_resp+0x52c/0xa70 [scsi_debug] 
 sp : ffff800022ab36f0 
 x29: ffff800022ab36f0 x28: ffff0023a935a610 
 x27: ffff800008e0a648 x26: 0000000000000003 
 x25: ffff0023e84f3200 x24: 00000000003d0900 
 x23: 0000000000000000 x22: 0000000000000000 
 x21: ffff0023be60a320 x20: ffff0023be60b538 
 x19: ffff800008e13000 x18: 0000000000000000 
 x17: 0000000000000000 x16: 0000000000000000 
 x15: 0000000000000000 x14: 0000000000000000 
 x13: 0000000000000000 x12: 0000000000000000 
 x11: 0000000000000000 x10: 0000000000000000 
 x9 : 0000000000000001 x8 : 0000000000000000 
 x7 : 0000000000000000 x6 : 00000000000000c1 
 x5 : 0000020000200000 x4 : dead0000000000ff 
 x3 : 0000000000000200 x2 : 0000000000000200 
 x1 : ffff800008e13d88 x0 : 0000000000000000 
 Call trace: 
schedule_resp+0x2a4/0xa70 [scsi_debug] 
scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug] 
scsi_queue_rq+0x698/0x840
__blk_mq_try_issue_directly+0x108/0x228
blk_mq_request_issue_directly+0x58/0x98
blk_mq_try_issue_list_directly+0x5c/0xf0 
blk_mq_sched_insert_requests+0x18c/0x200 
blk_mq_flush_plug_list+0x11c/0x190 
blk_flush_plug_list+0xdc/0x110 
blk_finish_plug+0x38/0x210 
blkdev_direct_IO+0x450/0x4d8 
generic_file_read_iter+0x84/0x180
blkdev_read_iter+0x3c/0x50 
aio_read+0xc0/0x170
io_submit_one+0x5c8/0xc98
__arm64_sys_io_submit+0x1b0/0x258
el0_svc_common.constprop.3+0x68/0x170
do_el0_svc+0x24/0x90 
el0_sync_handler+0x13c/0x1a8 
el0_sync+0x158/0x180 
 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340)

In addition, it should not be less than 1.

So add checks for these, and fail the module init for those cases.

Fixes: c483739430f10 ("scsi_debug: add multiple queue support")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/scsi_debug.c | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
2.26.2

Comments

Ming Lei July 9, 2020, 1:18 p.m. UTC | #1
On Thu, Jul 09, 2020 at 08:23:19PM +0800, John Garry wrote:
> sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like

> this can be triggered by passing an out-of-range value:

> 

> Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 

>  pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--) 

>  pc : schedule_resp+0x2a4/0xa70 [scsi_debug] 

>  lr : schedule_resp+0x52c/0xa70 [scsi_debug] 

>  sp : ffff800022ab36f0 

>  x29: ffff800022ab36f0 x28: ffff0023a935a610 

>  x27: ffff800008e0a648 x26: 0000000000000003 

>  x25: ffff0023e84f3200 x24: 00000000003d0900 

>  x23: 0000000000000000 x22: 0000000000000000 

>  x21: ffff0023be60a320 x20: ffff0023be60b538 

>  x19: ffff800008e13000 x18: 0000000000000000 

>  x17: 0000000000000000 x16: 0000000000000000 

>  x15: 0000000000000000 x14: 0000000000000000 

>  x13: 0000000000000000 x12: 0000000000000000 

>  x11: 0000000000000000 x10: 0000000000000000 

>  x9 : 0000000000000001 x8 : 0000000000000000 

>  x7 : 0000000000000000 x6 : 00000000000000c1 

>  x5 : 0000020000200000 x4 : dead0000000000ff 

>  x3 : 0000000000000200 x2 : 0000000000000200 

>  x1 : ffff800008e13d88 x0 : 0000000000000000 

>  Call trace: 

> schedule_resp+0x2a4/0xa70 [scsi_debug] 

> scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug] 

> scsi_queue_rq+0x698/0x840

> __blk_mq_try_issue_directly+0x108/0x228

> blk_mq_request_issue_directly+0x58/0x98

> blk_mq_try_issue_list_directly+0x5c/0xf0 

> blk_mq_sched_insert_requests+0x18c/0x200 

> blk_mq_flush_plug_list+0x11c/0x190 

> blk_flush_plug_list+0xdc/0x110 

> blk_finish_plug+0x38/0x210 

> blkdev_direct_IO+0x450/0x4d8 

> generic_file_read_iter+0x84/0x180

> blkdev_read_iter+0x3c/0x50 

> aio_read+0xc0/0x170

> io_submit_one+0x5c8/0xc98

> __arm64_sys_io_submit+0x1b0/0x258

> el0_svc_common.constprop.3+0x68/0x170

> do_el0_svc+0x24/0x90 

> el0_sync_handler+0x13c/0x1a8 

> el0_sync+0x158/0x180 

>  Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340)

> 

> In addition, it should not be less than 1.

> 

> So add checks for these, and fail the module init for those cases.

> 

> Fixes: c483739430f10 ("scsi_debug: add multiple queue support")

> Acked-by: Douglas Gilbert <dgilbert@interlog.com>

> Signed-off-by: John Garry <john.garry@huawei.com>

> ---

>  drivers/scsi/scsi_debug.c | 6 ++++++

>  1 file changed, 6 insertions(+)

> 

> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c

> index 4692f5b6ad13..68534a23866e 100644

> --- a/drivers/scsi/scsi_debug.c

> +++ b/drivers/scsi/scsi_debug.c

> @@ -6613,6 +6613,12 @@ static int __init scsi_debug_init(void)

>  		pr_err("submit_queues must be 1 or more\n");

>  		return -EINVAL;

>  	}

> +

> +	if ((sdebug_max_queue > SDEBUG_CANQUEUE) || (sdebug_max_queue <= 0)) {

> +		pr_err("max_queue must be in range [1, %d]\n", SDEBUG_CANQUEUE);

> +		return -EINVAL;

> +	}

> +

>  	sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue),

>  			       GFP_KERNEL);

>  	if (sdebug_q_arr == NULL)

> -- 

> 2.26.2

> 


Reviewed-by: Ming Lei <ming.lei@redhat.com>


-- 
Ming
diff mbox series

Patch

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 4692f5b6ad13..68534a23866e 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -6613,6 +6613,12 @@  static int __init scsi_debug_init(void)
 		pr_err("submit_queues must be 1 or more\n");
 		return -EINVAL;
 	}
+
+	if ((sdebug_max_queue > SDEBUG_CANQUEUE) || (sdebug_max_queue <= 0)) {
+		pr_err("max_queue must be in range [1, %d]\n", SDEBUG_CANQUEUE);
+		return -EINVAL;
+	}
+
 	sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue),
 			       GFP_KERNEL);
 	if (sdebug_q_arr == NULL)