diff mbox series

[20/27] dm: ppc: MPC8548CDS: add i2c DM support

Message ID 20200412085428.27519-20-biwen.li@oss.nxp.com
State New
Headers show
Series [01/27] rtc: ds1337: Add driver model support | expand

Commit Message

Biwen Li (OSS) April 12, 2020, 8:54 a.m. UTC
From: Biwen Li <biwen.li at nxp.com>

This supports i2c DM for board MPC8548CDS

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
 board/freescale/common/sys_eeprom.c | 3 ++-
 include/configs/MPC8548CDS.h        | 9 ++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

Comments

Priyanka Jain (OSS) April 16, 2020, 9:19 a.m. UTC | #1
>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Biwen Li
>Sent: Sunday, April 12, 2020 2:24 PM
>To: Jagdish Gediya <jagdish.gediya at nxp.com>; Priyanka Jain
><priyanka.jain at nxp.com>; hs at denx.de; jagan at amarulasolutions.com;
>aford173 at gmail.com; Alison Wang <alison.wang at nxp.com>;
>jh80.chung at samsung.com; Pramod Kumar <pramod.kumar_1 at nxp.com>;
>Rajesh Bhagat <rajesh.bhagat at nxp.com>; Ruchika Gupta
><ruchika.gupta at nxp.com>; olteanv at gmail.com
>Cc: Xiaobo Xie <xiaobo.xie at nxp.com>; Jiafei Pan <jiafei.pan at nxp.com>; u-
>boot at lists.denx.de; Z.q. Hou <zhiqiang.hou at nxp.com>; Biwen Li
><biwen.li at nxp.com>
>Subject: [PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
>
>From: Biwen Li <biwen.li at nxp.com>
>
>This supports i2c DM for board MPC8548CDS
>
>Signed-off-by: Biwen Li <biwen.li at nxp.com>
>---
> board/freescale/common/sys_eeprom.c | 3 ++-
> include/configs/MPC8548CDS.h        | 9 ++++++++-
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
>diff --git a/board/freescale/common/sys_eeprom.c
>b/board/freescale/common/sys_eeprom.c
>index 6f151b0f71..c52af7060e 100644
>--- a/board/freescale/common/sys_eeprom.c
>+++ b/board/freescale/common/sys_eeprom.c
>@@ -589,6 +589,7 @@ unsigned int get_cpu_board_revision(void)
> 		u8 major;         /* 0x04        Board revision, major */
> 		u8 minor;         /* 0x05        Board revision, minor */
> 	} be;
>+	int ret;
>
> #ifndef CONFIG_DM_I2C
> 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
>CONFIG_SYS_I2C_EEPROM_ADDR_LEN, @@ -603,7 +604,7 @@ unsigned int
>get_cpu_board_revision(void)  #else
> 	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
> 				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
>-				      &dev)
>+				      &dev);
Was this compilation error exist before this patch series as well?

> #endif
> 	if (!ret)
> 		dm_i2c_read(dev, 0, (void *)&be, sizeof(be)); diff --git
>a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index
>a68d190f6a..d185926cab 100644
>--- a/include/configs/MPC8548CDS.h
>+++ b/include/configs/MPC8548CDS.h
>@@ -1,6 +1,7 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
>  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
>+ * Copyright 2020 NXP
>  */
>
> /*
>@@ -304,12 +305,18 @@ extern unsigned long get_clock_freq(void);
> /*
>  * I2C
>  */
>+#ifndef CONFIG_DM_I2C
> #define CONFIG_SYS_I2C
>+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
>+#else
>+#define CONFIG_SYS_SPD_BUS_NUM 0
>+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
>+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
>+#endif
> #define CONFIG_SYS_I2C_FSL
> #define CONFIG_SYS_FSL_I2C_SPEED	400000
In other similar patches, you were adding this kind of defines under #ifndef CONFIG_DM_I2C
Why it is different for this patch?

Priyanka
> #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
> #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
>-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
>
> /* EEPROM */
> #define CONFIG_ID_EEPROM
>--
>2.17.1
Biwen Li April 16, 2020, 9:21 a.m. UTC | #2
> >
> >From: Biwen Li <biwen.li at nxp.com>
> >
> >This supports i2c DM for board MPC8548CDS
> >
> >Signed-off-by: Biwen Li <biwen.li at nxp.com>
> >---
> > board/freescale/common/sys_eeprom.c | 3 ++-
> > include/configs/MPC8548CDS.h        | 9 ++++++++-
> > 2 files changed, 10 insertions(+), 2 deletions(-)
> >
> >diff --git a/board/freescale/common/sys_eeprom.c
> >b/board/freescale/common/sys_eeprom.c
> >index 6f151b0f71..c52af7060e 100644
> >--- a/board/freescale/common/sys_eeprom.c
> >+++ b/board/freescale/common/sys_eeprom.c
> >@@ -589,6 +589,7 @@ unsigned int get_cpu_board_revision(void)
> > 		u8 major;         /* 0x04        Board revision, major */
> > 		u8 minor;         /* 0x05        Board revision, minor */
> > 	} be;
> >+	int ret;
> >
> > #ifndef CONFIG_DM_I2C
> > 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
> >CONFIG_SYS_I2C_EEPROM_ADDR_LEN, @@ -603,7 +604,7 @@ unsigned int
> >get_cpu_board_revision(void)  #else
> > 	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
> > 				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
> >-				      &dev)
> >+				      &dev);
> Was this compilation error exist before this patch series as well?
Yes, it is.
> 
> > #endif
> > 	if (!ret)
> > 		dm_i2c_read(dev, 0, (void *)&be, sizeof(be)); diff --git
> >a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index
> >a68d190f6a..d185926cab 100644
> >--- a/include/configs/MPC8548CDS.h
> >+++ b/include/configs/MPC8548CDS.h
> >@@ -1,6 +1,7 @@
> > /* SPDX-License-Identifier: GPL-2.0+ */
> > /*
> >  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
> >+ * Copyright 2020 NXP
> >  */
> >
> > /*
> >@@ -304,12 +305,18 @@ extern unsigned long get_clock_freq(void);
> > /*
> >  * I2C
> >  */
> >+#ifndef CONFIG_DM_I2C
> > #define CONFIG_SYS_I2C
> >+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
> >+#else
> >+#define CONFIG_SYS_SPD_BUS_NUM 0
> >+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
> >+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
> >+#endif
> > #define CONFIG_SYS_I2C_FSL
> > #define CONFIG_SYS_FSL_I2C_SPEED	400000
> In other similar patches, you were adding this kind of defines under #ifndef
> CONFIG_DM_I2C Why it is different for this patch?
> 
> Priyanka
> > #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
> > #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
> >-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
> >
> > /* EEPROM */
> > #define CONFIG_ID_EEPROM
> >--
> >2.17.1
Biwen Li (OSS) April 17, 2020, 5:57 a.m. UTC | #3
> Subject: RE: [PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
> 
> >-----Original Message-----
> >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Biwen Li
> >Sent: Sunday, April 12, 2020 2:24 PM
> >To: Jagdish Gediya <jagdish.gediya at nxp.com>; Priyanka Jain
> ><priyanka.jain at nxp.com>; hs at denx.de; jagan at amarulasolutions.com;
> >aford173 at gmail.com; Alison Wang <alison.wang at nxp.com>;
> >jh80.chung at samsung.com; Pramod Kumar <pramod.kumar_1 at nxp.com>;
> Rajesh
> >Bhagat <rajesh.bhagat at nxp.com>; Ruchika Gupta
> <ruchika.gupta at nxp.com>;
> >olteanv at gmail.com
> >Cc: Xiaobo Xie <xiaobo.xie at nxp.com>; Jiafei Pan <jiafei.pan at nxp.com>;
> >u- boot at lists.denx.de; Z.q. Hou <zhiqiang.hou at nxp.com>; Biwen Li
> ><biwen.li at nxp.com>
> >Subject: [PATCH 20/27] dm: ppc: MPC8548CDS: add i2c DM support
> >
> >From: Biwen Li <biwen.li at nxp.com>
> >
> >This supports i2c DM for board MPC8548CDS
> >
> >Signed-off-by: Biwen Li <biwen.li at nxp.com>
> >---
> > board/freescale/common/sys_eeprom.c | 3 ++-
> > include/configs/MPC8548CDS.h        | 9 ++++++++-
> > 2 files changed, 10 insertions(+), 2 deletions(-)
> >
> >diff --git a/board/freescale/common/sys_eeprom.c
> >b/board/freescale/common/sys_eeprom.c
> >index 6f151b0f71..c52af7060e 100644
> >--- a/board/freescale/common/sys_eeprom.c
> >+++ b/board/freescale/common/sys_eeprom.c
> >@@ -589,6 +589,7 @@ unsigned int get_cpu_board_revision(void)
> > 		u8 major;         /* 0x04        Board revision, major */
> > 		u8 minor;         /* 0x05        Board revision, minor */
> > 	} be;
> >+	int ret;
> >
> > #ifndef CONFIG_DM_I2C
> > 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
> >CONFIG_SYS_I2C_EEPROM_ADDR_LEN, @@ -603,7 +604,7 @@ unsigned int
> >get_cpu_board_revision(void)  #else
> > 	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
> > 				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
> >-				      &dev)
> >+				      &dev);
> Was this compilation error exist before this patch series as well?
> 
> > #endif
> > 	if (!ret)
> > 		dm_i2c_read(dev, 0, (void *)&be, sizeof(be)); diff --git
> >a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index
> >a68d190f6a..d185926cab 100644
> >--- a/include/configs/MPC8548CDS.h
> >+++ b/include/configs/MPC8548CDS.h
> >@@ -1,6 +1,7 @@
> > /* SPDX-License-Identifier: GPL-2.0+ */
> > /*
> >  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
> >+ * Copyright 2020 NXP
> >  */
> >
> > /*
> >@@ -304,12 +305,18 @@ extern unsigned long get_clock_freq(void);
> > /*
> >  * I2C
> >  */
> >+#ifndef CONFIG_DM_I2C
> > #define CONFIG_SYS_I2C
> >+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
> >+#else
> >+#define CONFIG_SYS_SPD_BUS_NUM 0
> >+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
> >+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
> >+#endif
> > #define CONFIG_SYS_I2C_FSL
> > #define CONFIG_SYS_FSL_I2C_SPEED	400000
> In other similar patches, you were adding this kind of defines under #ifndef
> CONFIG_DM_I2C Why it is different for this patch?
I will move it to #ifndef CONFIG_DM_I2C, and below configs in v2.
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
> Priyanka
> > #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
> > #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
> >-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
> >
> > /* EEPROM */
> > #define CONFIG_ID_EEPROM
> >--
> >2.17.1
diff mbox series

Patch

diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 6f151b0f71..c52af7060e 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -589,6 +589,7 @@  unsigned int get_cpu_board_revision(void)
 		u8 major;         /* 0x04        Board revision, major */
 		u8 minor;         /* 0x05        Board revision, minor */
 	} be;
+	int ret;
 
 #ifndef CONFIG_DM_I2C
 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
@@ -603,7 +604,7 @@  unsigned int get_cpu_board_revision(void)
 #else
 	ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_EEPROM_ADDR,
 				      CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-				      &dev)
+				      &dev);
 #endif
 	if (!ret)
 		dm_i2c_read(dev, 0, (void *)&be, sizeof(be));
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index a68d190f6a..d185926cab 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,6 +1,7 @@ 
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -304,12 +305,18 @@  extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
+#else
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
+#endif
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM