[v2,4/5] wandboard: Remove CONFIG_DISPLAY_BOARDINFO_LATE

Since we are using revD1 device tree for all board revisions, the
following can be seen on a revB1 board:

Model: Wandboard i.MX6 Quad Board revD1
Board: Wandboard rev B1

To avoid such confusing messages, disable CONFIG_DISPLAY_BOARDINFO_LATE.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v1:
- None

 configs/wandboard_defconfig | 1 -
 1 file changed, 1 deletion(-)

Hello Fabio,

Am 17.04.2020 um 14:27 schrieb Fabio Estevam:
> Since we are using revD1 device tree for all board revisions, the
> following can be seen on a revB1 board:
> 
> Model: Wandboard i.MX6 Quad Board revD1
> Board: Wandboard rev B1
> 
> To avoid such confusing messages, disable CONFIG_DISPLAY_BOARDINFO_LATE.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
> Changes since v1:
> - None
> 
>   configs/wandboard_defconfig | 1 -
>   1 file changed, 1 deletion(-)

Tested-by: Heiko Schocher <hs at denx.de>

Thanks!

bye,
Heiko
> 
> diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
> index ee70758f3a..f9a5fe479b 100644
> --- a/configs/wandboard_defconfig
> +++ b/configs/wandboard_defconfig
> @@ -29,7 +29,6 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
>   CONFIG_SYS_CONSOLE_IS_IN_ENV=y
>   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
>   # CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_BOUNCE_BUFFER=y
>   CONFIG_BOARD_EARLY_INIT_F=y
>   CONFIG_SPL_SEPARATE_BSS=y
>

> Since we are using revD1 device tree for all board revisions, the
> following can be seen on a revB1 board:
> Model: Wandboard i.MX6 Quad Board revD1
> Board: Wandboard rev B1
> To avoid such confusing messages, disable CONFIG_DISPLAY_BOARDINFO_LATE.
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Tested-by: Heiko Schocher <hs at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic