diff mbox series

[3/5] Revert "imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT"

Message ID 20200423110753.51231-4-hws@denx.de
State Accepted
Commit abf61e630e3e480a83caea084ac15388d59f5550
Headers show
Series Fix spl_mmc_boot_mode() implementation for IMX | expand

Commit Message

Harald Seiler April 23, 2020, 11:07 a.m. UTC
CONFIG_SPL_FORCE_MMC_BOOT was removed in a previous patch as its
behavior is the correct one in all cases.  Remove all uses of it from
defconfigs.

This reverts commit 3201e5b444ae3a13aa31e8b5101ad38d7ff0640d and removes
CONFIG_SPL_FORCE_MMC_BOOT from the imx28_xea defconfig.

Signed-off-by: Harald Seiler <hws at denx.de>
---
 configs/display5_defconfig  | 1 -
 configs/imx28_xea_defconfig | 1 -
 2 files changed, 2 deletions(-)

Comments

Stefano Babic May 2, 2020, 9:08 a.m. UTC | #1
> CONFIG_SPL_FORCE_MMC_BOOT was removed in a previous patch as its
> behavior is the correct one in all cases.  Remove all uses of it from
> defconfigs.
> This reverts commit 3201e5b444ae3a13aa31e8b5101ad38d7ff0640d and removes
> CONFIG_SPL_FORCE_MMC_BOOT from the imx28_xea defconfig.
> Signed-off-by: Harald Seiler <hws at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 9026c17f3fb5..f982191f7f53 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -38,7 +38,6 @@  CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SAVEENV=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_FORCE_MMC_BOOT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index 2d49b664deae..79fa08bbab2b 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -28,7 +28,6 @@  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
-CONFIG_SPL_FORCE_MMC_BOOT=y
 CONFIG_SPL_MMC_TINY=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_PAYLOAD="u-boot.img"