diff mbox series

[4/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MM EVK

Message ID 20200429130428.124788-5-hws@denx.de
State New
Headers show
Series ARM: imx: Fix reset in SPL | expand

Commit Message

Harald Seiler April 29, 2020, 1:04 p.m. UTC 
From: Marek Vasut <marex at denx.de>

Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Flavio Suligoi <f.suligoi at asem.it>
Cc: Harald Seiler <hws at denx.de>
Cc: Igor Opaniuk <igor.opaniuk at toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/dts/imx8mm-evk-u-boot.dtsi | 12 ++++++++++++
 board/freescale/imx8mm_evk/spl.c    |  9 ---------
 configs/imx8mm_evk_defconfig        |  5 +++++
 3 files changed, 17 insertions(+), 9 deletions(-)

Comments

Stefano Babic May 1, 2020, 4:32 p.m. UTC | #1 
> From: Marek Vasut <marex at denx.de>
> Board files should not re-implement do_reset() to work around this
> function not being defined in for specific configurations. Rather,
> the fix is to compile in drivers which implement this properly.
> This patch enables sysreset and watchdog drivers in SPL and ties
> them together to implement the same as the do_reset() hack in the
> board file, except correctly in the DM/DT framework.
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Flavio Suligoi <f.suligoi at asem.it>
> Cc: Harald Seiler <hws at denx.de>
> Cc: Igor Opaniuk <igor.opaniuk at toradex.com>
> Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Cc: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
index 3502602fbb86..b5c12105a9d1 100644
--- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -3,6 +3,14 @@ 
  * Copyright 2019 NXP
  */
 
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
 &{/soc at 0} {
 	u-boot,dm-pre-reloc;
 	u-boot,dm-spl;
@@ -117,3 +125,7 @@ 
 &fec1 {
 	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 };
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 5d17f397cb68..4d34622465b3 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -161,12 +161,3 @@  void board_init_f(ulong dummy)
 
 	board_init_r(NULL, 0);
 }
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	puts ("resetting ...\n");
-
-	reset_cpu(WDOG1_BASE_ADDR);
-
-	return 0;
-}
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index d988507bc330..120c76633066 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -30,6 +30,7 @@  CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
@@ -82,5 +83,9 @@  CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_IMX_WATCHDOG=y