@@ -413,14 +413,12 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, bool use_busy_signal, bool send_status,
bool ignore_crc)
{
+ struct mmc_host *host = card->host;
int err;
struct mmc_command cmd = {0};
unsigned long timeout;
u32 status = 0;
- BUG_ON(!card);
- BUG_ON(!card->host);
-
cmd.opcode = MMC_SWITCH;
cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
(index << 16) |
@@ -437,7 +435,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
if (index == EXT_CSD_SANITIZE_START)
cmd.sanitize_busy = true;
- err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
if (err)
return err;
@@ -449,7 +447,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
* CRC errors shall only be ignored in cases were CMD13 is used to poll
* to detect busy completion.
*/
- if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
ignore_crc = false;
/* Must check status to be sure of no errors. */
@@ -460,9 +458,9 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
if (err)
return err;
}
- if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
break;
- if (mmc_host_is_spi(card->host))
+ if (mmc_host_is_spi(host))
break;
/*
@@ -478,18 +476,18 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
/* Timeout if the device never leaves the program state. */
if (time_after(jiffies, timeout)) {
pr_err("%s: Card stuck in programming state! %s\n",
- mmc_hostname(card->host), __func__);
+ mmc_hostname(host), __func__);
return -ETIMEDOUT;
}
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
- if (mmc_host_is_spi(card->host)) {
+ if (mmc_host_is_spi(host)) {
if (status & R1_SPI_ILLEGAL_COMMAND)
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- pr_warning("%s: unexpected status %#x after "
- "switch", mmc_hostname(card->host), status);
+ pr_warn("%s: unexpected status %#x after switch\n",
+ mmc_hostname(host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
}
Instead of using several references to card->host, let's use a local variable. That means we can remove the BUG_ON verifications for the same pointers. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/mmc/core/mmc_ops.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)