diff mbox

[06/13] mmc: core: Use generic CMD6 time while switching to eMMC HS200 mode

Message ID 1391035085-2747-7-git-send-email-ulf.hansson@linaro.org
State Accepted
Commit 57de31f6351ecad9212a26d2112b546e4c8b4a5b
Headers show

Commit Message

Ulf Hansson Jan. 29, 2014, 10:37 p.m. UTC
Conform to the eMMC spec and use the CMD6 generic timeout from the
EXT_CSD register, when switching to HS200 mode.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/core/mmc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index ae3489a..897fdd1 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -857,7 +857,9 @@  static int mmc_select_hs200(struct mmc_card *card)
 	/* switch to HS200 mode if bus width set successfully */
 	if (!err)
 		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_HS_TIMING, 2, 0, true, true, true);
+				EXT_CSD_HS_TIMING, 2,
+				card->ext_csd.generic_cmd6_time,
+				true, true, true);
 err:
 	return err;
 }