diff mbox series

[V2,3/3] imx: imx8mn: enable CONFIG_CMD_ERASEENV

Message ID 20200108013030.6067-3-peng.fan@nxp.com
State Accepted
Commit 028c8c411976c30758ddb5f5ffeef792e4595d8d
Headers show
Series [V2,1/3] imx8mn: evk: add README | expand

Commit Message

Peng Fan Jan. 8, 2020, 1:11 a.m. UTC
enable CONFIG_CMD_ERASEENV to make it easy to erase env.
Use savedefconfig to generate new defconfig.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---

V2:
 None

 configs/imx8mn_ddr4_evk_defconfig | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

Comments

Fabio Estevam Jan. 8, 2020, 1:16 a.m. UTC | #1
On Tue, Jan 7, 2020 at 10:11 PM Peng Fan <peng.fan at nxp.com> wrote:
>
> enable CONFIG_CMD_ERASEENV to make it easy to erase env.
> Use savedefconfig to generate new defconfig.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>

Reviewed-by: Fabio Estevam <festevam at gmail.com>
diff mbox series

Patch

diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 50b03d0763..a63177e99d 100644
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -7,12 +7,15 @@  CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x400000
 CONFIG_TARGET_IMX8MN_EVK=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x400000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SPL_TEXT_BASE=0x912000
@@ -32,6 +35,7 @@  CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_ERASEENV=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
@@ -59,9 +63,6 @@  CONFIG_DM_GPIO=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC_IMX=y