@@ -1,5 +1,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/sandbox-gpio.h>
+
/ {
model = "sandbox";
compatible = "sandbox";
@@ -86,11 +89,14 @@
ping-expect = <0>;
ping-add = <0>;
u-boot,dm-pre-reloc;
- test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>,
+ test-gpios = <&gpio_a 1>, <&gpio_a 4>,
+ <&gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>,
<0>, <&gpio_a 12>;
- test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>,
- <&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>,
- <&gpio_b 9 0xc 3 2 1>;
+ test2-gpios = <&gpio_a 1>, <&gpio_a 4>,
+ <&gpio_b 6 GPIO_ACTIVE_LOW 3 2 1>,
+ <&gpio_b 7 GPIO_IN 3 2 1>,
+ <&gpio_b 8 GPIO_OUT 3 2 1>,
+ <&gpio_b 9 (GPIO_OUT|GPIO_OUT_ACTIVE) 3 2 1>;
int-value = <1234>;
uint-value = <(-1234)>;
};
@@ -10,6 +10,7 @@
#include <asm/gpio.h>
#include <dm/of.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/sandbox-gpio.h>
/* Flags for each GPIO */
#define GPIOF_OUTPUT (1 << 0) /* Currently set as an output */
@@ -136,13 +137,15 @@ static int sb_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
desc->offset = args->args[0];
if (args->args_count < 2)
return 0;
- if (args->args[1] & GPIO_ACTIVE_LOW)
- desc->flags |= GPIOD_ACTIVE_LOW;
- if (args->args[1] & 2)
+ /* treat generic binding with gpio uclass */
+ gpio_xlate_offs_flags(dev, desc, args);
+
+ /* sandbox test specific, not defined in gpio.h */
+ if (args->args[1] & GPIO_IN)
desc->flags |= GPIOD_IS_IN;
- if (args->args[1] & 4)
+ if (args->args[1] & GPIO_OUT)
desc->flags |= GPIOD_IS_OUT;
- if (args->args[1] & 8)
+ if (args->args[1] & GPIO_OUT_ACTIVE)
desc->flags |= GPIOD_IS_OUT_ACTIVE;
return 0;
new file mode 100644
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for binding sandbox,gpio
+ *
+ */
+#ifndef _DT_BINDINGS_GPIO_SANDBOX_GPIO_H
+#define _DT_BINDINGS_GPIO_SANDBOX_GPIO_H
+
+/*
+ * Add a specific binding for sandbox gpio.
+ * The value need to be after the generic defines of
+ * dt-bindings/gpio/gpio.h
+ */
+
+/* Bit 16 express GPIO input mode */
+#define GPIO_IN 0x10000
+
+/* Bit 17 express GPIO output mode */
+#define GPIO_OUT 0x20000
+
+/* Bit 18 express GPIO output is active */
+#define GPIO_OUT_ACTIVE 0x40000
+
+#endif