diff mbox series

[v2,04/10] arm: mvebu: clearfog: Use Pro DT by default

Message ID 20200119075249.32226-5-mrjoel@lixil.net
State Superseded
Headers show
Series ClearFog Base static variant support | expand

Commit Message

Joel Johnson Jan. 19, 2020, 7:52 a.m. UTC
Switch to explicitly using the Pro variant DT, which has been
available since Linux 4.11. Also unify the location of DT selection
in board_late_init instead of split between detection and static
configuration paths.

---

v2 changes
  - newly added in V2 series based on run-time rebasing

Signed-off-by: Joel Johnson <mrjoel at lixil.net>
---
 board/solidrun/clearfog/clearfog.c | 6 ++++--
 include/configs/clearfog.h         | 1 -
 2 files changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index b66f9f61cf..a3c5780730 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -269,7 +269,7 @@  int checkboard(void)
 #if defined (CONFIG_TARGET_CLEARFOG_BASE)
 	char *board = "ClearFog Base";
 #else
-	char *board = "ClearFog";
+	char *board = "ClearFog Pro";
 #endif
 
 	read_tlv_data();
@@ -300,9 +300,11 @@  int board_late_init(void)
 		 env_set("fdtfile", "armada-385-clearfog-gtr-s4.dtb");
 	else if (sr_product_is("Clearfog GTR L8"))
 		 env_set("fdtfile", "armada-385-clearfog-gtr-l8.dtb");
-#if defined (CONFIG_TARGET_CLEARFOG_BASE)
 	else
+#if defined (CONFIG_TARGET_CLEARFOG_BASE)
 		 env_set("fdtfile", "armada-388-clearfog-base.dtb");
+#else
+		 env_set("fdtfile", "armada-388-clearfog-pro.dtb");
 #endif
 
 	return 0;
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 633187d86f..6ca0474461 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -134,7 +134,6 @@ 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	RELOCATION_LIMITS_ENV_SETTINGS \
 	LOAD_ADDRESS_ENV_SETTINGS \
-	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
 	BOOTENV