@@ -243,10 +243,10 @@ config NUVOTON_NCT6102D
in the Nuvoton Super IO chips on X86 platforms.
config P2SB
- bool "Intel Primary-to-Sideband Bus"
+ bool "Intel Primary to Sideband Bridge"
depends on X86 || SANDBOX
help
- This enables support for the Intel Primary-to-Sideband bus,
+ This enables support for the Intel Primary to Sideband Bridge,
abbreviated to P2SB. The P2SB is used to access various peripherals
such as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCI
space. The space is segmented into different channels and peripherals
@@ -256,20 +256,20 @@ config P2SB
devices - see pcr_readl(), etc.
config SPL_P2SB
- bool "Intel Primary-to-Sideband Bus in SPL"
+ bool "Intel Primary to Sideband Bridge in SPL"
depends on SPL && (X86 || SANDBOX)
help
- The Primary-to-Sideband bus is used to access various peripherals
+ The Primary to Sideband Bridge is used to access various peripherals
through memory-mapped I/O in a large chunk of PCI space. The space is
segmented into different channels and peripherals are accessed by
device-specific means within those channels. Devices should be added
in the device tree as subnodes of the p2sb.
config TPL_P2SB
- bool "Intel Primary-to-Sideband Bus in TPL"
+ bool "Intel Primary to Sideband Bridge in TPL"
depends on TPL && (X86 || SANDBOX)
help
- The Primary-to-Sideband bus is used to access various peripherals
+ The Primary to Sideband Bridge is used to access various peripherals
through memory-mapped I/O in a large chunk of PCI space. The space is
segmented into different channels and peripherals are accessed by
device-specific means within those channels. Devices should be added
In Intel's documentation the term P2SB stands for "Primary to Sideband Bridge". Signed-off-by: Wolfgang Wallner <wolfgang.wallner at br-automation.com> --- Changes in v3: - Replaced the term in two more places drivers/misc/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)