diff mbox series

[PATCHv4,12/16] dts: powerpc: p1010rdb: Add eTSEC DT nodes

Message ID 20200701165857.39930-13-Zhiqiang.Hou@nxp.com
State Superseded
Headers show
Series powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH | expand

Commit Message

Zhiqiang Hou July 1, 2020, 4:58 p.m. UTC
From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

P1010RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
    eTSEC1: Connected to RGMII PHY AR8033
    eTSEC2: Connected to SGMII PHY AR8033
    eTSEC3: Connected to SGMII PHY AR8033

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
V4:
 - Remove the ptp_clock node.

 arch/powerpc/dts/p1010rdb-pa.dts     |  1 +
 arch/powerpc/dts/p1010rdb-pa_36b.dts |  1 +
 arch/powerpc/dts/p1010rdb.dtsi       | 50 ++++++++++++++++++++++++++++
 arch/powerpc/dts/p1010si-post.dtsi   | 25 ++++++++++++++
 4 files changed, 77 insertions(+)
diff mbox series

Patch

diff --git a/arch/powerpc/dts/p1010rdb-pa.dts b/arch/powerpc/dts/p1010rdb-pa.dts
index c66c4923ac..360d254d91 100644
--- a/arch/powerpc/dts/p1010rdb-pa.dts
+++ b/arch/powerpc/dts/p1010rdb-pa.dts
@@ -15,3 +15,4 @@ 
 };
 
 /include/ "p1010si-post.dtsi"
+/include/ "p1010rdb.dtsi"
diff --git a/arch/powerpc/dts/p1010rdb-pa_36b.dts b/arch/powerpc/dts/p1010rdb-pa_36b.dts
index b943de7cbb..062086a8c0 100644
--- a/arch/powerpc/dts/p1010rdb-pa_36b.dts
+++ b/arch/powerpc/dts/p1010rdb-pa_36b.dts
@@ -15,3 +15,4 @@ 
 };
 
 /include/ "p1010si-post.dtsi"
+/include/ "p1010rdb.dtsi"
diff --git a/arch/powerpc/dts/p1010rdb.dtsi b/arch/powerpc/dts/p1010rdb.dtsi
index 4f58ee2446..5964270878 100644
--- a/arch/powerpc/dts/p1010rdb.dtsi
+++ b/arch/powerpc/dts/p1010rdb.dtsi
@@ -5,6 +5,56 @@ 
  * Copyright 2020 NXP
  */
 &soc {
+	mdio at 24000 {
+		phy0: ethernet-phy at 0 {
+			reg = <0x1>;
+		};
+
+		phy1: ethernet-phy at 1 {
+			reg = <0x0>;
+		};
+
+		phy2: ethernet-phy at 2 {
+			reg = <0x2>;
+		};
+
+		tbi-phy at 3 {
+			device_type = "tbi-phy";
+			reg = <0x3>;
+		};
+	};
+
+	mdio at 25000 {
+		tbi0: tbi-phy at 11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio at 26000 {
+		tbi1: tbi-phy at 11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet at b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet at b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet at b2000 {
+		phy-handle = <&phy2>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
 	i2c at 3000 {
 		rtc at 68 {
 			compatible = "pericom,pt7c4338";
diff --git a/arch/powerpc/dts/p1010si-post.dtsi b/arch/powerpc/dts/p1010si-post.dtsi
index 0289441381..f825208056 100644
--- a/arch/powerpc/dts/p1010si-post.dtsi
+++ b/arch/powerpc/dts/p1010si-post.dtsi
@@ -25,6 +25,31 @@ 
 	};
 /include/ "pq3-i2c-0.dtsi"
 /include/ "pq3-i2c-1.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet at b0000 {
+		queue-group at b0000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet at b1000 {
+		queue-group at b1000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: ethernet at b2000 {
+		queue-group at b2000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+
+	};
 };
 
 /* controller at 0x9000 */