diff mbox series

[v4,2/7] dt-bindings: pinctrl: add ns3 pads definition

Message ID 20200710092325.5524-3-rayagonda.kokatanur@broadcom.com
State Superseded
Headers show
Series add basic driver support for broadcom NS3 soc | expand

Commit Message

Rayagonda Kokatanur July 10, 2020, 9:23 a.m. UTC
Add NS3 pads definitions.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
 .../dt-bindings/pinctrl/brcm,pinctrl-ns3.h    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
diff mbox series

Patch

diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h b/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
new file mode 100644
index 0000000000..81ebd58ca5
--- /dev/null
+++ b/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
@@ -0,0 +1,41 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Broadcom.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+
+/* Alternate functions available in MUX controller */
+#define MODE_NITRO				0
+#define MODE_NAND				1
+#define MODE_PNOR				2
+#define MODE_GPIO				3
+
+/* Pad configuration attribute */
+#define PAD_SLEW_RATE_ENA			BIT(0)
+#define PAD_SLEW_RATE_ENA_MASK			BIT(0)
+
+#define PAD_DRIVE_STRENGTH_2_MA			(0 << 1)
+#define PAD_DRIVE_STRENGTH_4_MA			BIT(1)
+#define PAD_DRIVE_STRENGTH_6_MA			(2 << 1)
+#define PAD_DRIVE_STRENGTH_8_MA			(3 << 1)
+#define PAD_DRIVE_STRENGTH_10_MA		(4 << 1)
+#define PAD_DRIVE_STRENGTH_12_MA		(5 << 1)
+#define PAD_DRIVE_STRENGTH_14_MA		(6 << 1)
+#define PAD_DRIVE_STRENGTH_16_MA		(7 << 1)
+#define PAD_DRIVE_STRENGTH_MASK			(7 << 1)
+
+#define PAD_PULL_UP_ENA				BIT(4)
+#define PAD_PULL_UP_ENA_MASK			BIT(4)
+
+#define PAD_PULL_DOWN_ENA			BIT(5)
+#define PAD_PULL_DOWN_ENA_MASK			BIT(5)
+
+#define PAD_INPUT_PATH_DIS			BIT(6)
+#define PAD_INPUT_PATH_DIS_MASK			BIT(6)
+
+#define PAD_HYSTERESIS_ENA			BIT(7)
+#define PAD_HYSTERESIS_ENA_MASK			BIT(7)
+
+#endif