@@ -11,6 +11,48 @@
DECLARE_GLOBAL_DATA_PTR;
+int arch_setup_bdinfo(void)
+{
+ bd_t *bd = gd->bd;
+
+ /*
+ * Save local variables to board info struct
+ */
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */
+ bd->bi_memsize = gd->ram_size; /* size in bytes */
+
+ if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) {
+ bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */
+ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */
+ }
+
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+ bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
+#endif
+
+#if defined(CONFIG_MPC83xx)
+ bd->bi_immrbar = CONFIG_SYS_IMMR;
+#endif
+
+ bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
+ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
+
+#if defined(CONFIG_CPM2)
+ bd->bi_cpmfreq = gd->arch.cpm_clk;
+ bd->bi_brgfreq = gd->arch.brg_clk;
+ bd->bi_sccfreq = gd->arch.scc_clk;
+ bd->bi_vco = gd->arch.vco_out;
+#endif /* CONFIG_CPM2 */
+
+#if defined(CONFIG_EXTRA_CLOCK)
+ bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */
+ bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
+ bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
+#endif
+
+ return 0;
+}
+
void __weak board_detail(void)
{
/* Please define board_detail() for your PPC platform */
@@ -602,8 +602,7 @@ __weak int arch_setup_bdinfo(void)
return 0;
}
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
- defined(CONFIG_SH)
+#if defined(CONFIG_MIPS) || defined(CONFIG_SH)
static int setup_board_part1(void)
{
bd_t *bd = gd->bd;
@@ -619,36 +618,6 @@ static int setup_board_part1(void)
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */
#endif
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
- bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
-#endif
-#if defined(CONFIG_MPC83xx)
- bd->bi_immrbar = CONFIG_SYS_IMMR;
-#endif
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_PPC)
-static int setup_board_part2(void)
-{
- bd_t *bd = gd->bd;
-
- bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
- bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
-#if defined(CONFIG_CPM2)
- bd->bi_cpmfreq = gd->arch.cpm_clk;
- bd->bi_brgfreq = gd->arch.brg_clk;
- bd->bi_sccfreq = gd->arch.scc_clk;
- bd->bi_vco = gd->arch.vco_out;
-#endif /* CONFIG_CPM2 */
-#if defined(CONFIG_EXTRA_CLOCK)
- bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */
- bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */
- bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */
-#endif
-
return 0;
}
#endif
@@ -974,13 +943,9 @@ static const init_fnc_t init_sequence_f[] = {
dram_init_banksize,
show_dram_config,
arch_setup_bdinfo,
-#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
- defined(CONFIG_SH)
+#if defined(CONFIG_MIPS) || defined(CONFIG_SH)
setup_board_part1,
-#endif
-#if defined(CONFIG_PPC)
INIT_FUNC_WATCHDOG_RESET
- setup_board_part2,
#endif
display_new_sp,
#ifdef CONFIG_OF_BOARD_FIXUP
Factor out ppc-specific bdinfo setup from generic init sequence to arch_setup_bdinfo in arch/powerpc/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where possible. Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com> --- v2 updates: - use "if (IS_ENABLED(CONFIG_SYS_HAS_SRAM))" instead of "#ifdef CONFIG_SYS_SRAM_BASE" arch/powerpc/lib/bdinfo.c | 42 +++++++++++++++++++++++++++++++++++++++ common/board_f.c | 39 ++---------------------------------- 2 files changed, 44 insertions(+), 37 deletions(-)