diff mbox series

[v1] power: pmic: pca9450: fix i2c address for PCA9450A

Message ID 20200713093408.15171-1-f.suligoi@asem.it
State New
Headers show
Series [v1] power: pmic: pca9450: fix i2c address for PCA9450A | expand

Commit Message

Flavio Suligoi July 13, 2020, 9:34 a.m. UTC
Change the I2C Slave Address of the PCA9450A:

0x35 --> 0x25

According to the NXP documentation, in the datasheet:

PCA9450DS.pdf (Rev 1.0 - 19 November 2019)

in the table 19 "PCA9450 I2C Slave Address) at page 27/96,

all the PCA9450 have the same I2C address.
In particular, in case of 7-bit Slave Address, the address
is 0x25.

This modification was tested on the imx8mm-evk, with the
SOC equipped with the PCA9450A instead of the previous
ROHM BD71847.

Signed-off-by: Flavio Suligoi <f.suligoi at asem.it>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
Changes:

v1: add "Reviewed-by: Peng Fan <peng.fan at nxp.com>"

 drivers/power/pmic/pca9450.c      | 2 +-
 drivers/power/pmic/pmic_pca9450.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c
index 0c9d9a366e..c7f8b80954 100644
--- a/drivers/power/pmic/pca9450.c
+++ b/drivers/power/pmic/pca9450.c
@@ -80,7 +80,7 @@  static struct dm_pmic_ops pca9450_ops = {
 };
 
 static const struct udevice_id pca9450_ids[] = {
-	{ .compatible = "nxp,pca9450a", .data = 0x35, },
+	{ .compatible = "nxp,pca9450a", .data = 0x25, },
 	{ .compatible = "nxp,pca9450b", .data = 0x25, },
 	{ }
 };
diff --git a/drivers/power/pmic/pmic_pca9450.c b/drivers/power/pmic/pmic_pca9450.c
index 67a9090200..c0fb78c4cd 100644
--- a/drivers/power/pmic/pmic_pca9450.c
+++ b/drivers/power/pmic/pmic_pca9450.c
@@ -23,7 +23,7 @@  int power_pca9450a_init(unsigned char bus)
 	p->name = pca9450_name;
 	p->interface = PMIC_I2C;
 	p->number_of_regs = PCA9450_REG_NUM;
-	p->hw.i2c.addr = 0x35;
+	p->hw.i2c.addr = 0x25;
 	p->hw.i2c.tx_num = 1;
 	p->bus = bus;