diff mbox series

[v3,4/6] sifive: fu540: Mark the default env as SPI flash

Message ID 20200604203949.550290-5-jagan@amarulasolutions.com
State Superseded
Headers show
Series riscv: sifive/fu540: SPI boot | expand

Commit Message

Jagan Teki June 4, 2020, 8:39 p.m. UTC
Mark the default U-Boot environment as SPI flash since
this is an on board flash device.

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- none

 board/sifive/fu540/Kconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Bin Meng June 22, 2020, 1:56 p.m. UTC | #1
On Fri, Jun 5, 2020 at 4:41 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Mark the default U-Boot environment as SPI flash since
> this is an on board flash device.
>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v3:
> - none
>
>  board/sifive/fu540/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
>

Reviewed-by: Bin Meng <bin.meng at windriver.com>
Tested-by: Bin Meng <bin.meng at windriver.com>
diff mbox series

Patch

diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
index 86193d7668..e1ba629e37 100644
--- a/board/sifive/fu540/Kconfig
+++ b/board/sifive/fu540/Kconfig
@@ -27,6 +27,7 @@  config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select SIFIVE_FU540
 	select SUPPORT_SPL
+	select ENV_IS_IN_SPI_FLASH
 	select RAM
 	select SPL_RAM if SPL
 	imply CMD_DHCP